Skip to content

Fiat Panda 2016 Key Fob & Car Keys

Keys that fit the 2011–2020 Fiat Panda: flip keys and remote keys, 3 buttons, 433 MHz. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2016 Fiat Panda.

Last updated: 2 October 2026

Key specifications for the Fiat Panda 2011–2020

Key types
flip keys, remote keys, key shells and emergency blades
Frequency
433 MHz
Buttons
3-button

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Fiat parts catalogue, with the specifications on each listing. Every remote listed for the Fiat Panda 2011–2020 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Fiat Panda 2016 key

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • All keys lost
    reads the PIN by OBD · PIN from a third party

Programming steps

Add key - MultiECUScan or a key tool with the Fiat Body Computer key coding (Snap-on, AD100)(GCC / Europe cars)

Needs: working key, every key the customer keeps (up to 8), new ID46 (PCF7946) flip key with a SIP22 blade, cut to the lock, 5-digit PIN from the CODE card, or PIN read by the tool

  1. Make each new key a dealer key first: the tool reads the body computer data and writes the car secret code into the new key.
  2. Gather every key the car must keep plus the new ones; one of them must already start the car.
  3. Connect the tool at the OBD port, choose the model and the Delphi body computer, and open key coding (key programming).
  4. Enter the 5-digit PIN from the CODE card when asked, or the PIN the tool reads.
  5. Insert each key in the ignition in turn and switch it ON when told; answer yes to code another key until the last one.
  6. Finish the procedure and let the tool store the keys in the body computer.
  7. Remove the keys, disconnect, wait 60 seconds, then start the engine with each key and test the remote.
Watch out: Every key not presented in this session is disabled for good and cannot be added again: bring all the keys the customer keeps. A blank key is refused until it has been made a dealer key for this car. If the procedure stops halfway the car can be left with no working key: do the job where the car can stay.

When the key changed

Key with a blade (regular or flip)

  • 2011 - 2020This yearChip: ID46433 MHzBlade: SIP22(GCC / Europe cars)Panda 169 in 2011, Panda 319 from 2012 (Delphi body computer); pre-coded key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Fiat Panda 2011–2020?

1 listing fit the Fiat Panda 2011–2020: flip keys, remote keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Fiat Panda 2011–2020 remote use?

Every remote listed for the Fiat Panda 2011–2020 transmits on 433 MHz.

Which tools program a Fiat Panda 2011–2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.