Skip to content

Ford C-max 2016 Key Fob & Car Keys

Keys that fit the 2016 Ford C-max: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID M3N5WY8609, 0UCD6000022 or 5WK49986, 4D-63 (80-bit) or ID46 (HITAG 2) chip, 315 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Ford C-max.

Last updated: 17 November 2026

Key specifications for the Ford C-max 2016

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
4D-63 (80-bit) · ID46 (HITAG 2)
Blade profile
HU101
Part numbers
164-R8062
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford C-max 2016 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford C-max 2016 key

Smart key (push to start)

7 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and Lonsdor K518. Advanced Diagnostics AD100 Pro / MVP Pro and Advanced Diagnostics Smart Pro list add key only.

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed

Programming steps

Add key - on the car(US / Canada cars)

Needs: Remote head key, two working keys available, two working programmed keys, the new remote head key cut to the car

  1. Insert the first working key and switch the ignition from OFF to ON for 3 to 10 seconds.
  2. Switch OFF and pull the key out.
  3. After 3 but within 10 seconds, insert the second working key and switch ON for 3 to 10 seconds.
  4. Switch OFF and pull the key out.
  5. After 3 but within 10 seconds, insert the new key and switch ON for at least 6 seconds.
  6. Pull the new key out and check that it starts the car and works the remote entry.
  7. If it failed, wait 10 seconds and repeat from the start.
Watch out: Up to 8 coded keys can be stored, all of them remote head keys if needed. Respect the 3 to 10 second windows at every step. This programs both the transponder and the remote of the new key.
Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new SecuriLock key (or flip / integrated keyhead key) to the vehicle and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON for 3 to 10 seconds, then switch OFF and pull it out.
  3. Within 10 seconds put the second working key in, switch to ON for 3 to 10 seconds, then OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON; leave it on for at least 6 seconds.
  5. Check that the new key starts the engine and works the remote buttons; if not, wait 10 seconds and repeat from step 2.
  6. For each extra key wait about 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. Maximum eight keys on the vehicle. If it fails twice, stop and use a tool instead of repeating.
Add key - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)

Needs: new transponder key cut to the vehicle, battery maintainer

  1. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  2. Read the key count first and note it.
  3. Put the new key in the ignition, switch ON and choose Add key.
  4. Let the tool get security access: a timed wait of about 10 minutes; keep the ignition ON and do not interrupt it.
  5. When the tool reports the key is programmed, leave the new key at ON for about 20 seconds, then switch OFF.
  6. Read the key count again, then start the engine with the new key and with an old key.
Watch out: Keep the battery voltage stable through the timed wait; a drop means starting the wait again. Maximum eight keys. With no working key left, use All keys lost instead: Add key does not erase the old keys.
All keys lost - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)

Needs: two new transponder keys cut to the vehicle, battery maintainer

  1. Cut two new keys; the car will not start with fewer than two learned keys.
  2. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  3. Put the first new key in the ignition, switch ON and choose All keys lost (erase keys and program).
  4. Let the tool get security access: a timed wait of about 10 minutes; do not switch off.
  5. Let the tool erase all stored keys; follow its prompts to switch OFF and back ON so the first key is learned.
  6. When asked, insert the second new key and switch ON for about 10 seconds.
  7. Confirm the tool reports two keys, then start the engine with both keys.
Watch out: All stored keys are erased: bring every key the customer keeps and program them in the same session. With only one key learned the engine will not start and the theft light flashes: a second different key is required.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost

When the key changed

Smart key (push to start)

  • 2010 - 2015Chip: 4D-63433 MHzFCC: KR55WK48801(GCC / Europe cars)Mk2 and Grand C-Max keyless fob, 80-bit version.
  • 2015 - 2019This yearChip: Hitag Pro433 MHzFCC: KR5876268(GCC / Europe cars)Facelift keyless fob shared with the Focus; also Grand C-Max.

Key with a blade (regular or flip)

  • 2003 - 2015Chip: 4D-63433 MHzBlade: HU101(GCC / Europe cars)Mk1 40-bit chip; Mk2 and Grand C-Max (2010-2015) 80-bit chip.
  • 2013 - 2018This yearChip: 4D-63315 MHzBlade: HU101FCC: OUCD6000022(US / Canada cars)US C-Max Hybrid / Energi key-start cars; 80-bit chip.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford C-max 2016?

11 listings fit the Ford C-max 2016: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford C-max 2016 remote use?

Every remote listed for the Ford C-max 2016 transmits on 315 MHz.

Which transponder chip does the Ford C-max 2016 key use?

The listings for this car carry: 4D-63 (80-bit) · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Ford C-max 2016 remotes carry?

The remotes listed for this car carry FCC ID 0UCD6000022, 5WK49986 and M3N5WY8609. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford C-max 2016 key use?

The blades listed for this car: HU101.

Which tools program a Ford C-max 2016 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Advanced Diagnostics AD100 Pro / MVP Pro, Advanced Diagnostics Smart Pro, Autel KM100 (IKEY universal smart key) and Xhorse VVDI Key Tool Max for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.