Skip to content

Ford Crown Victoria 1998–1999 Key Fob & Car Keys

Keys that fit the 1998–1999 Ford Crown Victoria: transponder keys, 4C chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 1998 Ford Crown Victoria.

Last updated: 6 November 2026

Key specifications for the Ford Crown Victoria 1998–1999

Key types
transponder keys, key shells and emergency blades
Transponder chip
4C
Part numbers
597602

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Crown Victoria 1998 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: PATS two-key method, two original working keys that start the engine, the new key, cut to the car before programming

  1. Insert a working key and turn it ON (just before cranking) for at least 1 second, then back OFF.
  2. Remove it and, within 10 seconds, insert the second working key; turn it ON for 1 to 10 seconds, then OFF, and remove it.
  3. Within 20 seconds, insert the new key and turn it ON for at least 1 second, then back OFF.
  4. The security light stays on for 3 seconds when the new key is accepted.
Watch out: With one working key or none, the key must be programmed by a dealer or locksmith. Fails if one of the two keys is a hardware-store clone; both must be original programmed keys.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote the customer keeps, working ones included

  1. Gather every remote, the working ones included.
  2. Turn the ignition from OFF to RUN 4 times within 3 seconds.
  3. The door locks cycle: programming mode is on.
  4. Within 7.5 seconds, press any button on the first remote; the door locks cycle.
  5. Within 7.5 seconds each time, press any button on the next remote and wait for the locks to cycle; repeat for every remote.
  6. Wait 7.5 seconds, then turn the ignition OFF.
  7. Wait 20 seconds, then test LOCK and UNLOCK on every remote.
Watch out: Programming mode erases every stored remote; reprogram all of them in the same session. Up to 4 remotes can be stored.

When the key changed

Key with a blade (regular or flip)

  • 1998 - 2002This yearChip: 4CBlade: H75(US / Canada cars)
  • 2003 - 2012Chip: 4D-63Blade: H75(US / Canada cars)Car ended in 2012; no later key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Crown Victoria 1998–1999?

4 listings fit the Ford Crown Victoria 1998–1999: transponder keys, key shells and emergency blades. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Ford Crown Victoria 1998–1999 key use?

The listings for this car carry: 4C. Check the chip in each listing's specifications.

Which tools program a Ford Crown Victoria 1998–1999 key?

The tool makers' coverage lists name Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Ford Crown Victoria 1998–1999 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.