Skip to content

Ford Edge 2015 Key Fob & Car Keys

Keys that fit the 2015 Ford Edge: smart keys, remote keys and transponder keys, 3, 4 or 5 buttons, FCC ID CWTWB1U793, M3N5WY8609 or M3NA2C31243300, ID46 (HITAG 2) or PCF7945A chip, 315 MHz, 433 MHz or 434 MHz. 36 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Ford Edge.

Last updated: 17 November 2026

Key specifications for the Ford Edge 2015

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz, 433 MHz, 434 MHz and 902 MHz
Buttons
3-, 4- and 5-button
Transponder chip
ID46 (HITAG 2) · PCF7945A · ID49 (HITAG Pro) · 4D-63 (80-bit) · PCF7939FA
Blade profile
HU101
Part numbers
164-R8073 · 5921287 · 164-R8109 · PCF7939FA
Battery
CR2032 · CR2025

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 433 MHz, 434 MHz and 902 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Edge 2015 key

Smart key (push to start)

6 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Smart key (push-button start) cars, two programmed smart keys inside the car, the new smart key

  1. Open the floor console storage lid and put the first programmed smart key in the backup slot, buttons toward the rear and key ring up.
  2. Press the START/STOP button, wait 5 seconds, then press it again.
  3. Take the key out. Within 10 seconds, put the second programmed smart key in the backup slot.
  4. Press START/STOP, wait 5 seconds, then press it again. Take the key out.
  5. Wait 5 seconds, put the new smart key in the backup slot and press START/STOP.
  6. Check that the remote buttons work and that the new key starts the car.
Watch out: The car must be off and all doors closed before you start, and the doors must stay closed throughout. Finish every step within 30 seconds of starting; if a step is done out of order, stop and wait at least 1 minute before trying again. Only 4 smart keys can be stored; to replace a key, or when 4 are already stored, the keys must be erased and reprogrammed with a tool. If it fails, wait 10 seconds and repeat the sequence.

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: Remote head key (key and remote in one), two working programmed keys, the new key, cut to the car

  1. Insert the first working key and turn the ignition from OFF to ON. Hold it in ON for 3 to 10 seconds.
  2. Turn the ignition OFF and pull the first key out.
  3. After 3 seconds and before 10 seconds have passed, insert the second working key and turn it to ON for 3 to 10 seconds.
  4. Turn the ignition OFF and pull the second key out.
  5. After 3 seconds and before 10 seconds have passed, insert the new key and turn it to ON. Hold it in ON for at least 6 seconds.
  6. Pull the new key out. It must start the engine, and on a remote head key its buttons must lock and unlock the car.
Watch out: Every key change must fall after 3 seconds and within 10 seconds; a missed window means starting over. If the new key does not work, wait 10 seconds and run the whole sequence again. With fewer than two working keys this method cannot be used; the key must be programmed with a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

When the key changed

Smart key (push to start)

  • 2011 - 2014Chip: ID46FCC: M3N5WY8609Push-to-start trims only.
  • 2015 - 2024This yearChip: ID49FCC: M3N-A2C31243800, M3N-A2C93142300, M3N-A2C93142600315, 434 and 902 MHz fobs exist: check the FCC id.

Key with a blade (regular or flip)

  • 2007 - 2010Chip: 4D-63Blade: H75(US / Canada cars)40-bit version.
  • 2011 - 2014Chip: 4D-63Blade: H75(US / Canada cars)80-bit version; a 40-bit key will not program.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Edge 2015?

36 listings fit the Ford Edge 2015: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Edge 2015 remote use?

Listings for the Ford Edge 2015 come in 315 MHz, 433 MHz, 434 MHz and 902 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Ford Edge 2015 key use?

The listings for this car carry: ID46 (HITAG 2) · PCF7945A · ID49 (HITAG Pro) · 4D-63 (80-bit) · PCF7939FA. Check the chip in each listing's specifications.

Which FCC IDs do Ford Edge 2015 remotes carry?

The remotes listed for this car carry FCC ID 0UCD6000022, 2010DJ4008, 2010DJ4009, A2C91253902, CWTWB1U311, CWTWB1U331, CWTWB1U345, CWTWB1U793 and others. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford Edge 2015 key use?

The blades listed for this car: HU101.

Which tools program a Ford Edge 2015 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Ford Edge 2015 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.