Skip to content

Ford Expedition 2020 Key Fob & Car Keys

Keys that fit the 2020 Ford Expedition: smart keys, flip keys and remote keys, 3, 4 or 5 buttons, FCC ID M3NA2C931426, M3NA2C93142600 or N5FA08TAA, ID49 (HITAG Pro) or PCF7939FA chip, 315 MHz, 868 MHz or 902 MHz. 16 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Ford Expedition.

Last updated: 17 November 2026

Key specifications for the Ford Expedition 2020

Key types
smart keys, flip keys, remote keys, transponder keys, key shells and key blanks
Frequency
315 MHz, 868 MHz and 902 MHz
Buttons
3-, 4- and 5-button
Transponder chip
ID49 (HITAG Pro) · PCF7939FA
Blade profile
HU101
Part numbers
JL1T-15K601-CC · 164-R8130 · 164-R8149 · PCF7939FA
Battery
CR2450 · CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz, 868 MHz and 902 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Expedition 2020 key

Smart key (push to start)

4 tools list this key. 4 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working Intelligent Access keys, new Intelligent Access key

  1. Make sure the vehicle is off and find the backup slot (the slot or pad where a key is placed to start with a flat fob battery).
  2. Put the first working key in the backup slot and press START/STOP; wait five seconds and press START/STOP again.
  3. Remove the key; within 10 seconds put the second working key in the slot and press START/STOP.
  4. Wait five seconds, press START/STOP again and remove the key.
  5. Put the new key in the backup slot and press START/STOP.
  6. Check the remote buttons and that the new key starts the engine; if it failed, wait 10 seconds and repeat from step 2.
Watch out: Maximum four Intelligent Access keys.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote

When the key changed

Smart key (push to start)

  • 2015 - 2017Chip: ID46315 MHzFCC: M3N5WY8609(US / Canada cars)Push-to-start trims only.
  • from 2018This yearChip: ID49Blade: HU101Fob frequency varies (315, 434 or 902 MHz): read the FCC ID.

Key with a blade (regular or flip)

  • 1997 - 2002Chip: 4CBlade: H75(US / Canada cars)
  • 2003 - 2010Chip: 4D-63Blade: H75(US / Canada cars)40-bit version.
  • 2011 - 2017Chip: 4D-63Blade: H75FCC: CWTWB1U793(US / Canada cars)80-bit version; a 40-bit key will not program.
  • 2018 - 2022This yearChip: ID49315 MHzBlade: HU101FCC: N5F-A08TAA(US / Canada cars)Flip key for key-start trims.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Expedition 2020?

16 listings fit the Ford Expedition 2020: smart keys, flip keys, remote keys, transponder keys, key shells and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Expedition 2020 remote use?

Listings for the Ford Expedition 2020 come in 315 MHz, 868 MHz and 902 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Ford Expedition 2020 key use?

The listings for this car carry: ID49 (HITAG Pro) · PCF7939FA. Check the chip in each listing's specifications.

Which FCC IDs do Ford Expedition 2020 remotes carry?

The remotes listed for this car carry FCC ID M3NA2C931423, M3NA2C931426, M3NA2C93142600 and N5FA08TAA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford Expedition 2020 key use?

The blades listed for this car: HU101.

Which tools program a Ford Expedition 2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Launch X-431 IMMO for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.