Skip to content

Ford F-150 2013–2014 Key Fob & Car Keys

Keys that fit the 2013–2014 Ford F-150: smart keys, remote keys and transponder keys, 3 or 4 buttons, FCC ID 0UCD6000022, CWTWB1U311 or CWTWB1U331, 4D-63 or ID49 (HITAG Pro) chip, 315 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Ford F-150.

Last updated: 17 November 2026

Key specifications for the Ford F-150 2013–2014

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
4D-63 · ID49 (HITAG Pro)
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford F-150 2013–2014 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford F-150 2013 key

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
  • Advanced Diagnostics Smart Pro
    • Add key

All keys lost is listed by OBDSTAR Key Master G3. Advanced Diagnostics Smart Pro lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new SecuriLock key (or flip / integrated keyhead key) to the vehicle and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON for 3 to 10 seconds, then switch OFF and pull it out.
  3. Within 10 seconds put the second working key in, switch to ON for 3 to 10 seconds, then OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON; leave it on for at least 6 seconds.
  5. Check: the theft light comes on for about 3 seconds and goes out, and the new key starts the engine. A flashing theft light means it was not learned.
  6. For each extra key wait about 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. Maximum eight keys on the vehicle. If it fails twice, stop and use a tool instead of repeating.
Add key - on the car(US / Canada cars)

Needs: Turned key or remote head key, two working programmed keys, the new key, cut to the car

  1. Insert the first working key and turn the ignition from OFF to ON. Hold it in ON for 3 to 10 seconds.
  2. Turn the ignition OFF and pull the first key out.
  3. After 3 seconds and before 10 seconds have passed, insert the second working key and turn it to ON for 3 to 10 seconds.
  4. Turn the ignition OFF and pull the second key out.
  5. After 3 seconds and before 10 seconds have passed, insert the new key and turn it to ON. Hold it in ON for at least 6 seconds.
  6. Pull the new key out. It must start the engine, and on a remote head key its buttons must lock and unlock the car.
Watch out: Every key change must fall after 3 seconds and within 10 seconds; a missed window means starting over. If the new key does not work, wait 10 seconds and run the whole sequence again. With fewer than two working keys this method cannot be used; the key must be programmed with a tool.

Without a tool

The remote is programmed on the car, without a tool. It takes two working keys. Up to 4 remotes.

When the key changed

Smart key (push to start)

  • 2015 - 2021Chip: ID49Push-to-start trims only.

Key with a blade (regular or flip)

  • 1999 - 2003Chip: 4CBlade: H75(US / Canada cars)
  • 2004 - 2010Chip: 4D-63Blade: H75(US / Canada cars)40-bit version. 2004 Heritage (old body) uses the 4C key.
  • 2011 - 2014This yearChip: 4D-63315 MHzBlade: H75FCC: CWTWB1U793(US / Canada cars)80-bit version; a 40-bit key will not program.
  • 2015 - 2020Chip: ID49Blade: HU101FCC: N5F-A08TAA, N5F-A08TDA(US / Canada cars)315 and 902 MHz flip keys exist: check the FCC id.
  • from 2021Chip: ID49Blade: HU198FCC: N5F-A08TAA(US / Canada cars)Center-mill HU198 blade. Frequency differs by fob.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford F-150 2013–2014?

10 listings fit the Ford F-150 2013–2014: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford F-150 2013–2014 remote use?

Every remote listed for the Ford F-150 2013–2014 transmits on 315 MHz.

Which transponder chip does the Ford F-150 2013–2014 key use?

The listings for this car carry: 4D-63 · ID49 (HITAG Pro). Check the chip in each listing's specifications.

Which FCC IDs do Ford F-150 2013–2014 remotes carry?

The remotes listed for this car carry FCC ID 0UCD6000022, CWTWB1U311, CWTWB1U331, CWTWB1U345, CWTWB1U793 and H92PT. Match it with the FCC ID printed on your original remote.

Which tools program a Ford F-150 2013–2014 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Advanced Diagnostics Smart Pro for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Ford F-150 2013–2014 remote be programmed without a tool?

The remote is programmed on the car, without a tool. It takes two working keys. Up to 4 remotes.