Skip to content

Ford Fiesta 2019 Key Fob & Car Keys

Keys that fit the 2019 Ford Fiesta: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID CWTWB1U793, 0UCD6000022 or A08TBB, 4D-63 or ID49 (HITAG Pro) chip, 315 MHz or 433 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Ford Fiesta.

Last updated: 16 November 2026

Key specifications for the Ford Fiesta 2019

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
4D-63 · ID49 (HITAG Pro)
Blade profile
HU101
Part numbers
164-R8062 · 164-R7976 · DS7T-15K601-BF · K1BT-15K601-AD
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Fiesta 2019 key

Smart key (push to start)

3 tools list this key. 3 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation
    Needs: AD ADC2000 cable
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
    • Add key
    • All keys lost

Key with a blade (regular or flip)

5 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Remote head key (key and remote in one), two working programmed keys, the new key, cut to the car

  1. Insert the first working key and turn the ignition from OFF to ON. Hold it in ON for 3 to 10 seconds.
  2. Turn the ignition OFF and pull the first key out.
  3. After 3 seconds and before 10 seconds have passed, insert the second working key and turn it to ON for 3 to 10 seconds.
  4. Turn the ignition OFF and pull the second key out.
  5. After 3 seconds and before 10 seconds have passed, insert the new key and turn it to ON. Hold it in ON for at least 6 seconds.
  6. Pull the new key out. It must start the engine, and on a remote head key its buttons must lock and unlock the car.
Watch out: Every key change must fall after 3 seconds and within 10 seconds; a missed window means starting over. If the new key does not work, wait 10 seconds and run the whole sequence again. With fewer than two working keys this method cannot be used; the key must be programmed with a tool.
Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new SecuriLock key (or flip / integrated keyhead key) to the vehicle and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON for 3 to 10 seconds, then switch OFF and pull it out.
  3. Within 10 seconds put the second working key in, switch to ON for 3 to 10 seconds, then OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON; leave it on for at least 6 seconds.
  5. Check that the new key starts the engine and works the remote buttons; if not, wait 10 seconds and repeat from step 2.
  6. For each extra key wait about 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. Maximum eight keys on the vehicle. If it fails twice, stop and use a tool instead of repeating.
Add key - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)

Needs: new transponder key cut to the vehicle, battery maintainer

  1. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  2. Read the key count first and note it.
  3. Put the new key in the ignition, switch ON and choose Add key.
  4. Let the tool get security access: a timed wait of about 10 minutes; keep the ignition ON and do not interrupt it.
  5. When the tool reports the key is programmed, leave the new key at ON for about 20 seconds, then switch OFF.
  6. Read the key count again, then start the engine with the new key and with an old key.
Watch out: Keep the battery voltage stable through the timed wait; a drop means starting the wait again. Maximum eight keys. With no working key left, use All keys lost instead: Add key does not erase the old keys.
All keys lost - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)

Needs: two new transponder keys cut to the vehicle, battery maintainer

  1. Cut two new keys; the car will not start with fewer than two learned keys.
  2. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  3. Put the first new key in the ignition, switch ON and choose All keys lost (erase keys and program).
  4. Let the tool get security access: a timed wait of about 10 minutes; do not switch off.
  5. Let the tool erase all stored keys; follow its prompts to switch OFF and back ON so the first key is learned.
  6. When asked, insert the second new key and switch ON for about 10 seconds.
  7. Confirm the tool reports two keys, then start the engine with both keys.
Watch out: All stored keys are erased: bring every key the customer keeps and program them in the same session. With only one key learned the engine will not start and the theft light flashes: a second different key is required.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote

When the key changed

Smart key (push to start)

  • 2008 - 2017Chip: 4D-63433 MHzFCC: KR55WK48801(GCC / Europe cars)Mk7 keyless fob, 80-bit version.
  • 2011 - 2019This yearChip: 4D-63433 MHzFCC: KR55WK48801(US / Canada cars)Push-to-start trims; 80-bit chip.
  • 2017 - 2023This yearChip: Hitag Pro(GCC / Europe cars)Mk8 keyless fob. Lists name the chip ID47 or ID49.

Key with a blade (regular or flip)

  • 1995 - 2002Chip: 4C(GCC / Europe cars)Mk4 / Mk5. 2001-2002 cars may have the 4D-60 chip.
  • 2001 - 2002Chip: 4D-60(GCC / Europe cars)Late Mk5 cars only; others keep the 4C chip.
  • 2002 - 2008Chip: 4D-63(GCC / Europe cars)Mk6, 40-bit version.
  • 2008 - 2017Chip: 4D-63433 MHzBlade: HU101(GCC / Europe cars)Mk7. Early cars 40-bit, later cars 80-bit.
  • 2011 - 2019This yearChip: 4D-63315 MHzBlade: HU101FCC: KR55WK47899, CWTWB1U793(US / Canada cars)80-bit version, side-milled HU101 key.
  • 2017 - 2023This yearChip: Hitag Pro433 MHzBlade: HU101(GCC / Europe cars)Mk8 flip key. Lists name the chip ID47 or ID49.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Fiesta 2019?

12 listings fit the Ford Fiesta 2019: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Fiesta 2019 remote use?

Listings for the Ford Fiesta 2019 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Ford Fiesta 2019 key use?

The listings for this car carry: 4D-63 · ID49 (HITAG Pro). Check the chip in each listing's specifications.

Which FCC IDs do Ford Fiesta 2019 remotes carry?

The remotes listed for this car carry FCC ID 0UCD6000022, A08TBB and CWTWB1U793. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford Fiesta 2019 key use?

The blades listed for this car: HU101.

Which tools program a Ford Fiesta 2019 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.