Skip to content

Ford Ranger 2012 Key Fob & Car Keys

Keys that fit the 2012 Ford Ranger: flip keys, remote keys and transponder keys, 2 buttons, FCC ID 5WK50168 or H92PT, 4D-63 (80-bit) chip, 433 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Ford Ranger.

Last updated: 15 November 2026

Key specifications for the Ford Ranger 2012

Key types
flip keys, remote keys, transponder keys, key shells and emergency blades
Frequency
433 MHz
Buttons
2-button
Transponder chip
4D-63 (80-bit)
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford Ranger 2012 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Ranger 2012 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
    • Add key
    • All keys lost
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key

All keys lost is listed by OBDSTAR Key Master G3 and Lonsdor K518. Advanced Diagnostics AD100 Pro / MVP Pro lists add key only.

Programming steps

Add key - on the car(GCC / Europe cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new key and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition and switch ON.
  3. Within 10 seconds switch OFF and pull the key out.
  4. Within 10 seconds put the second working key in and switch ON, then within 10 seconds switch OFF and pull it out.
  5. Within 10 seconds put the new key in and switch ON.
  6. Check that the new key starts the engine; if not, wait a moment and repeat from step 2.
Watch out: Needs two different keys that already start the car; with one key or none, the manual sends you to the dealer (tool work). The remote buttons of a new remote key are learned separately (see the remote case).

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote
    PIN read function

Without a tool

Programming steps

Program the remote without a tool(GCC / Europe cars)

Needs: the key, all remotes to be kept

  1. Bring every remote the customer keeps, keep them inside the vehicle, fasten the front seat belts and close all doors.
  2. Turn the key from 0 to II four times within six seconds.
  3. Turn the key to 0: a tone confirms programming mode (leave the key in the ignition).
  4. Within 10 seconds press any button on the first remote; a tone confirms it.
  5. Within 10 seconds press a button on each further remote, the original ones included.
  6. Turn the key back to II, or wait 10 seconds, to end; then test every remote.
Watch out: Only the remotes pressed in this session work afterwards: all others are erased. Maximum eight remotes.

When the key changed

Smart key (push to start)

  • 2019 - 2023Chip: ID49(US / Canada cars)Push-to-start trims only.

Key with a blade (regular or flip)

  • 1999 - 2000Chip: 4CBlade: H75(US / Canada cars)Transponder was optional on these years.
  • 2001 - 2011Chip: 4D-63Blade: H75(US / Canada cars)An 80-bit capable key also programs the 40-bit years.
  • 2011 - 2015This yearChip: 4D-63433 MHzBlade: HU101(GCC / Europe cars)Global Ranger (T6). 80-bit version.
  • 2015 - 2022Chip: Hitag Pro433 MHzBlade: HU101(GCC / Europe cars)Global Ranger facelift. Lists name the chip ID47 or ID49.
  • 2019 - 2023Chip: ID49Blade: HU101FCC: N5F-A08TAA, N5F-A08TDA(US / Canada cars)US Ranger flip key. 315 and 902 MHz versions exist.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Ranger 2012?

5 listings fit the Ford Ranger 2012: flip keys, remote keys, transponder keys, key shells and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Ranger 2012 remote use?

Every remote listed for the Ford Ranger 2012 transmits on 433 MHz.

Which transponder chip does the Ford Ranger 2012 key use?

The listings for this car carry: 4D-63 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Ford Ranger 2012 remotes carry?

The remotes listed for this car carry FCC ID 5WK50168 and H92PT. Match it with the FCC ID printed on your original remote.

Which tools program a Ford Ranger 2012 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Advanced Diagnostics AD100 Pro / MVP Pro and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.