Skip to content

Ford Tourneo Connect 2011 Key Fob & Car Keys

Keys that fit the 2009–2013 Ford Tourneo Connect: remote keys, 4D-63 chip. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Ford Tourneo Connect.

Last updated: 2 October 2026

Key specifications for the Ford Tourneo Connect 2009–2013

Key types
remote keys, key shells, emergency blades and key blanks
Transponder chip
4D-63
Blade profile
FO21

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Tourneo Connect 2011 key

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed

Programming steps

Add key - OBDSTAR Key Master G3 / Key Master 5(GCC / Europe cars)

Needs: new transponder key cut to the vehicle, battery maintainer

  1. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  2. Read the key count first and note it.
  3. Put the new key in the ignition, switch ON and choose Add key.
  4. Let the tool get security access: a timed wait of about 10 minutes; keep the ignition ON and do not interrupt it.
  5. When the tool reports the key is programmed, leave the new key at ON for about 20 seconds, then switch OFF.
  6. Read the key count again, then start the engine with the new key and with an old key.
Watch out: Keep the battery voltage stable through the timed wait; a drop means starting the wait again. With no working key left, use All keys lost instead: Add key does not erase the old keys.
All keys lost - OBDSTAR Key Master G3 / Key Master 5(GCC / Europe cars)

Needs: two new transponder keys cut to the vehicle, battery maintainer

  1. Cut two new keys; the car will not start with fewer than two learned keys.
  2. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  3. Put the first new key in the ignition, switch ON and choose All keys lost (erase keys and program).
  4. Let the tool get security access: a timed wait of about 10 minutes; do not switch off.
  5. Let the tool erase all stored keys; follow its prompts to switch OFF and back ON so the first key is learned.
  6. When asked, insert the second new key and switch ON for about 10 seconds.
  7. Confirm the tool reports two keys, then start the engine with both keys.
Watch out: All stored keys are erased: bring every key the customer keeps and program them in the same session. With only one key learned the engine will not start and the theft light flashes: a second different key is required.

When the key changed

Key with a blade (regular or flip)

  • 2002 - 2008Chip: 4D-60(GCC / Europe cars)Mk1 (Transit Connect twin). 2007-2008 is a split: read the chip
  • 2008 - 2013This yearChip: 4D-63(GCC / Europe cars)Mk1 later cars. 2007-2008 is a split: read the chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Tourneo Connect 2009–2013?

2 listings fit the Ford Tourneo Connect 2009–2013: remote keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Ford Tourneo Connect 2009–2013 key use?

The listings for this car carry: 4D-63. Check the chip in each listing's specifications.

Which blade profile does the Ford Tourneo Connect 2009–2013 key use?

The blades listed for this car: FO21.

Which tools program a Ford Tourneo Connect 2009–2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.