Skip to content

Ford Transit 2014 Key Fob & Car Keys

Keys that fit the 2014 Ford Transit: flip keys, remote keys and transponder keys, 3 or 4 buttons, FCC ID 5WK49986, KR55WK47899 or 0UCD6000022, 4D-63 (80-bit) chip, 315 MHz or 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Ford Transit.

Last updated: 15 November 2026

Key specifications for the Ford Transit 2014

Key types
flip keys, remote keys, transponder keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
4D-63 (80-bit)
Blade profile
HU101
Part numbers
164-R8062 · 164-R8042
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Transit 2014 key

Key with a blade (regular or flip)

6 tools list this key. 3 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation
    Needs: AD ADC2000 cable
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key
    • Universal key
    • Universal key

All keys lost is listed by Advanced Diagnostics Smart Pro, Lonsdor K518 and OBDSTAR Key Master G3. Advanced Diagnostics AD100 Pro / MVP Pro lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Turned key or remote head key, two working programmed keys, the new key, cut to the car

  1. Insert the first working key and turn the ignition from OFF to ON. Hold it in ON for 3 to 10 seconds.
  2. Turn the ignition OFF and pull the first key out.
  3. After 3 seconds and before 10 seconds have passed, insert the second working key and turn it to ON for 3 to 10 seconds.
  4. Turn the ignition OFF and pull the second key out.
  5. After 3 seconds and before 10 seconds have passed, insert the new key and turn it to ON. Hold it in ON for at least 6 seconds.
  6. Pull the new key out. It must start the engine, and on a remote head key its buttons must lock and unlock the car.
Watch out: Every key change must fall after 3 seconds and within 10 seconds; a missed window means starting over. If the new key does not work, wait 10 seconds and run the whole sequence again. With fewer than two working keys this method cannot be used; the key must be programmed with a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost

When the key changed

Smart key (push to start)

  • 2020 - 2023Chip: ID49315 MHz(US / Canada cars)Push-to-start vans; fob FCC ids differ: read the label.

Key with a blade (regular or flip)

  • 1995 - 2000Chip: 4C(GCC / Europe cars)Pre-2000 Transit. 2000 is a split year with the 4D-60 van.
  • 2000 - 2006Chip: 4D-60(GCC / Europe cars)Mk6. Some later vans use the 4D-63 chip: check the key.
  • 2006 - 2013Chip: 4D-63433 MHzBlade: FO21(GCC / Europe cars)Mk7, Tibbe-type FO21 key. 40-bit or 80-bit: check the key.
  • 2014 - 2016This yearChip: 4D-63433 MHzBlade: HU101(GCC / Europe cars)Mk8 remote key, 80-bit version.
  • 2015 - 2019Chip: 4D-63315 MHzBlade: HU101FCC: OUCD6000022(US / Canada cars)80-bit version, side-milled HU101 remote head key.
  • 2016 - 2022Chip: Hitag Pro433 MHzBlade: HU101(GCC / Europe cars)Mk8 flip key from 2016 (split year). Lists name the chip ID47 or ID49.
  • 2020 - 2023Chip: ID49315 MHzBlade: HU101FCC: N5F-A08TAA(US / Canada cars)Flip key. 2019 is a split year: check the key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Transit 2014?

10 listings fit the Ford Transit 2014: flip keys, remote keys, transponder keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Transit 2014 remote use?

Listings for the Ford Transit 2014 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Ford Transit 2014 key use?

The listings for this car carry: 4D-63 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Ford Transit 2014 remotes carry?

The remotes listed for this car carry FCC ID 0UCD6000022, 5WK49986 and KR55WK47899. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford Transit 2014 key use?

The blades listed for this car: HU101.

Which tools program a Ford Transit 2014 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, Lonsdor K518, OBDSTAR Key Master G3, Advanced Diagnostics AD100 Pro / MVP Pro, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.