Skip to content

Ford Transit 2016–2018 Key Fob & Car Keys

Keys that fit the 2016–2018 Ford Transit: remote keys and transponder keys, 3 or 4 buttons, FCC ID KR55WK47899 or 0UCD6000022, ID49 (HITAG Pro) or 4D-63 (80-bit) chip, 315 MHz. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Ford Transit.

Last updated: 17 November 2026

Key specifications for the Ford Transit 2016–2018

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
ID49 (HITAG Pro) · 4D-63 (80-bit)
Blade profile
HU101
Part numbers
164-R8062 · 164-R8042
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford Transit 2016–2018 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Transit 2016 key

Key with a blade (regular or flip)

6 tools list this key. 3 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation
    Needs: AD ADC2000 cable
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key
    • Universal key
    • Universal key

All keys lost is listed by Advanced Diagnostics Smart Pro, Lonsdor K518 and OBDSTAR Key Master G3. Advanced Diagnostics AD100 Pro / MVP Pro lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Turned key or remote head key, two working programmed keys, the new key, cut to the car

  1. Insert the first working key and turn the ignition from OFF to ON. Hold it in ON for 3 to 10 seconds.
  2. Turn the ignition OFF and pull the first key out.
  3. After 3 seconds and before 10 seconds have passed, insert the second working key and turn it to ON for 3 to 10 seconds.
  4. Turn the ignition OFF and pull the second key out.
  5. After 3 seconds and before 10 seconds have passed, insert the new key and turn it to ON. Hold it in ON for at least 6 seconds.
  6. Pull the new key out. It must start the engine, and on a remote head key its buttons must lock and unlock the car.
Watch out: Every key change must fall after 3 seconds and within 10 seconds; a missed window means starting over. If the new key does not work, wait 10 seconds and run the whole sequence again. With fewer than two working keys this method cannot be used; the key must be programmed with a tool.
Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new SecuriLock key (or flip / integrated keyhead key) to the vehicle and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON for 3 to 10 seconds, then switch OFF and pull it out.
  3. Within 10 seconds put the second working key in, switch to ON for 3 to 10 seconds, then OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON; leave it on for at least 6 seconds.
  5. Check that the new key starts the engine and works the remote buttons; if not, wait 10 seconds and repeat from step 2.
  6. For each extra key wait about 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. Maximum eight keys on the vehicle. If it fails twice, stop and use a tool instead of repeating.
Add key - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)

Needs: new transponder key cut to the vehicle, battery maintainer

  1. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  2. Read the key count first and note it.
  3. Put the new key in the ignition, switch ON and choose Add key.
  4. Let the tool get security access: a timed wait of about 10 minutes; keep the ignition ON and do not interrupt it.
  5. When the tool reports the key is programmed, leave the new key at ON for about 20 seconds, then switch OFF.
  6. Read the key count again, then start the engine with the new key and with an old key.
Watch out: Keep the battery voltage stable through the timed wait; a drop means starting the wait again. Maximum eight keys. With no working key left, use All keys lost instead: Add key does not erase the old keys.
All keys lost - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)

Needs: two new transponder keys cut to the vehicle, battery maintainer

  1. Cut two new keys; the car will not start with fewer than two learned keys.
  2. Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
  3. Put the first new key in the ignition, switch ON and choose All keys lost (erase keys and program).
  4. Let the tool get security access: a timed wait of about 10 minutes; do not switch off.
  5. Let the tool erase all stored keys; follow its prompts to switch OFF and back ON so the first key is learned.
  6. When asked, insert the second new key and switch ON for about 10 seconds.
  7. Confirm the tool reports two keys, then start the engine with both keys.
Watch out: All stored keys are erased: bring every key the customer keeps and program them in the same session. With only one key learned the engine will not start and the theft light flashes: a second different key is required.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote

When the key changed

Smart key (push to start)

  • 2020 - 2023Chip: ID49315 MHz(US / Canada cars)Push-to-start vans; fob FCC ids differ: read the label.

Key with a blade (regular or flip)

  • 1995 - 2000Chip: 4C(GCC / Europe cars)Pre-2000 Transit. 2000 is a split year with the 4D-60 van.
  • 2000 - 2006Chip: 4D-60(GCC / Europe cars)Mk6. Some later vans use the 4D-63 chip: check the key.
  • 2006 - 2013Chip: 4D-63433 MHzBlade: FO21(GCC / Europe cars)Mk7, Tibbe-type FO21 key. 40-bit or 80-bit: check the key.
  • 2014 - 2016This yearChip: 4D-63433 MHzBlade: HU101(GCC / Europe cars)Mk8 remote key, 80-bit version.
  • 2015 - 2019This yearChip: 4D-63315 MHzBlade: HU101FCC: OUCD6000022(US / Canada cars)80-bit version, side-milled HU101 remote head key.
  • 2016 - 2022This yearChip: Hitag Pro433 MHzBlade: HU101(GCC / Europe cars)Mk8 flip key from 2016 (split year). Lists name the chip ID47 or ID49.
  • 2020 - 2023Chip: ID49315 MHzBlade: HU101FCC: N5F-A08TAA(US / Canada cars)Flip key. 2019 is a split year: check the key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Transit 2016–2018?

9 listings fit the Ford Transit 2016–2018: remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Transit 2016–2018 remote use?

Every remote listed for the Ford Transit 2016–2018 transmits on 315 MHz.

Which transponder chip does the Ford Transit 2016–2018 key use?

The listings for this car carry: ID49 (HITAG Pro) · 4D-63 (80-bit). Check the chip in each listing's specifications.

Which FCC IDs do Ford Transit 2016–2018 remotes carry?

The remotes listed for this car carry FCC ID 0UCD6000022 and KR55WK47899. Match it with the FCC ID printed on your original remote.

Which blade profile does the Ford Transit 2016–2018 key use?

The blades listed for this car: HU101.

Which tools program a Ford Transit 2016–2018 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, Lonsdor K518, OBDSTAR Key Master G3, Advanced Diagnostics AD100 Pro / MVP Pro, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.