Ford Windstar 1998 Key Fob & Car Keys
Keys that fit the 1998 Ford Windstar: smart keys, remote keys and transponder keys, 4 or 5 buttons, FCC ID CWTWB1U311, CWTWB1U331 or CWTWB1U345, 4C chip, 315 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 1998 Ford Windstar.
Last updated: 6 November 2026
Key specifications for the Ford Windstar 1998
- Key types
- smart keys, remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 4- and 5-button
- Transponder chip
- 4C
- Part numbers
- 597602
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford Windstar 1998 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $5.61In Stock
- $1.40In Stock
- Ford Windstar Freestar Remote Shell 5-button
SKU: B01793
$1.40In Stock - $14.04Out of Stock
Programming the Ford Windstar 1998 key
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Early built 1998 Windstar, every remote to be programmed, in hand, a key that turns the ignition
- Turn the ignition from OFF to RUN 5 times within 10 seconds, ending in RUN. The door locks cycle to show programming mode.
- Within 20 seconds, press any button on the first remote. The locks cycle to confirm it.
- Within 20 seconds, press any button on the second remote. The locks cycle again to confirm it.
- Turn the ignition OFF. The locks cycle one more time to close programming mode.
Program the remote without a tool(US / Canada cars)
Needs: Late built 1998 Windstar, every remote to be programmed, in hand, a key that turns the ignition
- Turn the ignition from OFF to RUN 8 times within 10 seconds, ending in RUN. The door locks cycle to show programming mode.
- Within 20 seconds, press any button on the first remote. The locks cycle to confirm it.
- Within 20 seconds, press any button on the second remote. The locks cycle again to confirm it.
- Turn the ignition OFF. The locks cycle one more time to close programming mode.
When the key changed
Key with a blade (regular or flip)
- 1999 - 2000Chip: 4CBlade: H75(US / Canada cars)Chip in the key head; separate remote.
- 2001 - 2003Chip: 4D-63Blade: H75(US / Canada cars)40-bit version; an 80-bit key also programs.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Ford Windstar 1998?
5 listings fit the Ford Windstar 1998: smart keys, remote keys, transponder keys, key shells and emergency blades, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Ford Windstar 1998 remote use?
Every remote listed for the Ford Windstar 1998 transmits on 315 MHz.
Which transponder chip does the Ford Windstar 1998 key use?
The listings for this car carry: 4C. Check the chip in each listing's specifications.
Which FCC IDs do Ford Windstar 1998 remotes carry?
The remotes listed for this car carry FCC ID CWTWB1U311, CWTWB1U331, CWTWB1U345 and CWTWB1U511. Match it with the FCC ID printed on your original remote.
Can the Ford Windstar 1998 remote be programmed without a tool?
The remote is programmed on the car, without a tool.




