Skip to content

Ford Windstar 2000 Key Fob & Car Keys

Keys that fit the 1999–2000 Ford Windstar: smart keys, remote keys and transponder keys, 4 or 5 buttons, FCC ID CWTWB1U311, CWTWB1U331 or CWTWB1U345, 4C chip, 315 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Ford Windstar.

Last updated: 6 November 2026

Key specifications for the Ford Windstar 1999–2000

Key types
smart keys, remote keys, transponder keys, key shells and emergency blades
Frequency
315 MHz
Buttons
4- and 5-button
Transponder chip
4C
Part numbers
597602
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford Windstar 1999–2000 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Ford Windstar 2000 key

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote to be programmed, in hand, a key that turns the ignition

  1. Turn the ignition from OFF to RUN 8 times within 10 seconds, ending in RUN. The door locks cycle to show programming mode.
  2. Within 20 seconds, press any button on the first remote. The locks cycle to confirm it.
  3. Within 20 seconds, press any button on the second remote. The locks cycle again to confirm it.
  4. Turn the ignition OFF. The locks cycle one more time to close programming mode.
Watch out: All 8 turns must fit within 10 seconds and the last one must stop in RUN. Each remote must be pressed within 20 seconds of the previous lock cycle.

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2000This yearChip: 4CBlade: H75(US / Canada cars)Chip in the key head; separate remote.
  • 2001 - 2003Chip: 4D-63Blade: H75(US / Canada cars)40-bit version; an 80-bit key also programs.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Ford Windstar 1999–2000?

6 listings fit the Ford Windstar 1999–2000: smart keys, remote keys, transponder keys, key shells and emergency blades, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Ford Windstar 1999–2000 remote use?

Every remote listed for the Ford Windstar 1999–2000 transmits on 315 MHz.

Which transponder chip does the Ford Windstar 1999–2000 key use?

The listings for this car carry: 4C. Check the chip in each listing's specifications.

Which FCC IDs do Ford Windstar 1999–2000 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1U311, CWTWB1U331, CWTWB1U345 and CWTWB1U511. Match it with the FCC ID printed on your original remote.

Which tools program a Ford Windstar 1999–2000 key?

The tool makers' coverage lists name Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Ford Windstar 1999–2000 remote be programmed without a tool?

The remote is programmed on the car, without a tool.