SKU: B06841
Ford Windstar 2001–2003 Key Fob & Car Keys
Keys that fit the 2001–2003 Ford Windstar: smart keys and remote keys, 4 or 5 buttons, FCC ID CWTWB1U311, CWTWB1U331 or CWTWB1U345, 4D-63 chip, 315 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2001 Ford Windstar.
Last updated: 6 November 2026
Key specifications for the Ford Windstar 2001–2003
- Key types
- smart keys, remote keys, key shells and key blanks
- Frequency
- 315 MHz
- Buttons
- 4- and 5-button
- Transponder chip
- 4D-63
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Ford parts catalogue, with the specifications on each listing. Every remote listed for the Ford Windstar 2001–2003 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- 4D-63 40-Bit Carbon Transponder Chip for Ford Lincoln Mazda 2001-2015 - Aftermarket Blank Chip$1.97In Stock
- $5.61In Stock
- Ford Windstar Freestar Remote Shell 5-button
SKU: B01793
$1.40In Stock
Programming the Ford Windstar 2001 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new transponder key cut to the vehicle
- Cut the new SecuriLock key to the vehicle and keep it next to two keys that already start the engine.
- Put the first working key in the ignition, switch to ON for 1 to 10 seconds, then switch OFF and pull it out.
- Within 10 seconds put the second working key in, switch to ON for 1 to 10 seconds, then OFF and pull it out.
- Within 20 seconds put the new key in and switch to ON; leave it ON for at least 1 second.
- Check: the theft light comes on for about 3 seconds and goes out, and the new key starts the engine. A flashing theft light means it was not learned.
- For each extra key wait about 20 seconds and start again from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: the key, all remotes to be kept
- Bring every remote the customer keeps: any remote not pressed in this session stops working.
- Close the doors, unlock with the power lock switch and keep your foot off the brake pedal for the whole sequence.
- Insert the key and turn OFF to ON eight times within about 10 seconds, ending in ON.
- The locks cycle to show programming mode is open.
- Within 20 seconds press any button on the first remote; the locks cycle to confirm.
- Press a button on each remaining remote, one after the other, inside the time window.
- Switch the ignition OFF to close programming mode (the locks cycle again), then test every remote.
When the key changed
Key with a blade (regular or flip)
- 1999 - 2000Chip: 4CBlade: H75(US / Canada cars)Chip in the key head; separate remote.
- 2001 - 2003This yearChip: 4D-63Blade: H75(US / Canada cars)40-bit version; an 80-bit key also programs.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Ford Windstar 2001–2003?
5 listings fit the Ford Windstar 2001–2003: smart keys, remote keys, key shells and key blanks, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Ford Windstar 2001–2003 remote use?
Every remote listed for the Ford Windstar 2001–2003 transmits on 315 MHz.
Which transponder chip does the Ford Windstar 2001–2003 key use?
The listings for this car carry: 4D-63. Check the chip in each listing's specifications.
Which FCC IDs do Ford Windstar 2001–2003 remotes carry?
The remotes listed for this car carry FCC ID CWTWB1U311, CWTWB1U331, CWTWB1U345 and CWTWB1U511. Match it with the FCC ID printed on your original remote.
Which tools program a Ford Windstar 2001–2003 key?
The tool makers' coverage lists name Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Ford Windstar 2001–2003 remote be programmed without a tool?
The remote is programmed on the car, without a tool.




