GMC Envoy 2007 Key Fob & Car Keys
Keys that fit the 2002–2009 GMC Envoy: smart keys and remote keys, 3 buttons, FCC ID MYT3X6898B, 315 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 GMC Envoy.
Last updated: 2 October 2026
Key specifications for the GMC Envoy 2002–2009
- Key types
- smart keys, remote keys and key shells
- Frequency
- 315 MHz
- Buttons
- 3-button
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the GMC parts catalogue, with the specifications on each listing. Every remote listed for the GMC Envoy 2002–2009 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.12In Stock
Programming the GMC Envoy 2007 key
Key with a blade (regular or flip)
3 tools list this key. 1 of them list all keys lost.
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Remote
reads the PIN by OBD
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: the ignition key, every remote the customer keeps
- Close all doors and put the key in the ignition.
- Press and hold the power UNLOCK switch on the driver door panel; keep holding until step 4.
- Quickly turn the ignition ON (without starting), OFF, ON, OFF.
- Release the UNLOCK switch. The locks must cycle by themselves after you let go; if they do not, remove the key, open the driver door and start again.
- Hold LOCK and UNLOCK on the remote until the locks cycle (up to 30 seconds).
- Repeat step 5 right away for every other remote, the existing ones included.
- Turn the ignition ON to leave programming mode.
- Test every remote.
When the key changed
Key with a blade (regular or flip)
- 2002 - 2009This yearChip: None (PassLock)Blade: B102(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the GMC Envoy 2002–2009?
2 listings fit the GMC Envoy 2002–2009: smart keys, remote keys and key shells, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the GMC Envoy 2002–2009 remote use?
Every remote listed for the GMC Envoy 2002–2009 transmits on 315 MHz.
Which FCC IDs do GMC Envoy 2002–2009 remotes carry?
The remotes listed for this car carry FCC ID MYT3X6898B. Match it with the FCC ID printed on your original remote.
Which tools program a GMC Envoy 2002–2009 key?
The tool makers' coverage lists name XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the GMC Envoy 2002–2009 remote be programmed without a tool?
The remote is programmed on the car, without a tool.

