GMC Terrain 2019 Key Fob & Car Keys
Keys that fit the 2018–2019 GMC Terrain: smart keys, flip keys and remote keys, 3, 4 or 5 buttons, FCC ID HYQ1AA, HYQ1EA or 0HT01060512, ID46E (GM extended) or ID46 (HITAG 2) chip, 315 MHz. 24 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 GMC Terrain.
Last updated: 17 November 2026
Key specifications for the GMC Terrain 2018–2019
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz
- Buttons
- 3-, 4- and 5-button
- Transponder chip
- ID46E (GM extended) · ID46 (HITAG 2)
- Blade profile
- HU100
- Part numbers
- 13584502 · For GM 13504199 · 13591388 · 13584512
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the GMC parts catalogue, with the specifications on each listing. Every remote listed for the GMC Terrain 2018–2019 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $4.21In Stock
- $3.65In Stock
- 2015-2020 GMC Terrain Acadia Yukon Yukon XL Smart Key Shell 4-button HYQ1AA / HYQ1EA Aftermarket
SKU: B05733
$4.21In Stock - $4.21In Stock
- $16.85In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- GMC Terrain 2018-2022 Smart Key 4-Button 315 MHz - HYQ1AA 13584512 Aftermarket with HU100 Blade
SKU: B07895
$16.85In Stock - $28.09In Stock
- $28.09In Stock
- NXP Killer Adapter MCKB003 for Chevrolet GMC 2015-2023 Smart Keys - Solder-Free 435451-0170
SKU: B02283
$9.83In Stock - $10.11In Stock
- $14.04Out of Stock
Programming the GMC Terrain 2019 key
Smart key (push to start)
6 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Universal key
- Universal key
- Universal key
Programming steps
Add key - on the car(US / Canada cars)
Needs: With two recognized transmitters, the two recognized transmitters, every new remote to program
- Switch the car off and put the two recognized transmitters in the cup holder.
- Take off the lock cylinder cap on the driver's door handle.
- Insert a key blade in the driver's door lock and turn it toward UNLOCK (counterclockwise) five times within 10 seconds. The DIC shows READY FOR REMOTE #2, 3, 4, ETC.
- Put the new remote in the cup holder.
- Press ENGINE START/STOP. Once the remote is learned, the DIC asks for the next one.
- Take the remote out and press its LOCK or UNLOCK button.
- For each extra remote, repeat the last three steps.
- Hold ENGINE START/STOP for about 12 seconds to exit programming mode, then put the key blades back in the remotes.
Add key - on the car(US / Canada cars)
Needs: No recognized transmitter available (relearn all), every remote to program, all in hand
- Switch the car off and take off the lock cylinder cap on the driver's door handle.
- Insert the key blade in the driver's door lock and turn it toward UNLOCK (counterclockwise) five times within 10 seconds. The DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. REMOTE LEARN PENDING, PLEASE WAIT shows again.
- Do the previous step two more times (three 10-minute waits in all). The DIC then shows READY FOR REMOTE # 1.
- Put the first remote in the cup holder.
- Press ENGINE START/STOP. Once the remote is learned, the DIC asks for the next one.
- Take the remote out and press its LOCK or UNLOCK button.
- Repeat the last three steps for every other remote.
- Hold ENGINE START/STOP for about 12 seconds to exit programming mode, then put the key blades back in the remotes.
Add key - on the car(US / Canada cars)
Needs: two working smart keys, new smart key
- Have the vehicle off and every smart key (two working ones and the new ones) with you.
- Put the two working smart keys in the cupholder (or the place the owner's manual names).
- Remove the key blade, insert it in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows READY FOR REMOTE #2, 3...
- Place the new smart key in the transmitter pocket and press ENGINE START/STOP; the DIC shows it is ready for the next one.
- Take the key out of the pocket and press lock or unlock on it.
- Repeat steps 4-5 for each new key, then hold ENGINE START/STOP about 12 seconds to leave programming mode.
All keys lost - on the car(US / Canada cars)
Needs: every smart key to be kept, 30 minutes
- Have every smart key the customer keeps with you; the blade of the new key must be cut if no key works.
- With the vehicle off, insert the key blade in the driver door lock cylinder and turn to unlock five times within 10 seconds; the DIC shows REMOTE LEARN PENDING, PLEASE WAIT.
- Wait about 10 minutes until the DIC shows PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP.
- Repeat the 10-minute wait and button press two more times (about 30 minutes in all); the DIC then shows READY FOR REMOTE #1.
- Place a smart key in the transmitter pocket and press ENGINE START/STOP; the DIC moves to the next number.
- Take it out, press lock or unlock, and repeat for every key the customer keeps.
- Hold ENGINE START/STOP about 12 seconds to leave programming mode, then test every key.
Key with a blade (regular or flip)
One tool lists this key.
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
PIN read function
Without a tool
The remote is programmed on the car, without a tool. Up to 8 remotes.
When the key changed
Smart key (push to start)
- 2018 - 2024This yearChip: ID46Blade: HU100FCC: HYQ1AA, HYQ1ESHYQ1AA is 315 MHz, HYQ1ES is 433 MHz: read the FCC ID.
Key with a blade (regular or flip)
- 2010 - 2017Chip: ID46 Hitag2 Extended315 MHzBlade: HU100FCC: OHT01060512(US / Canada cars)Flip key; remote and chip learn together.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the GMC Terrain 2018–2019?
24 listings fit the GMC Terrain 2018–2019: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the GMC Terrain 2018–2019 remote use?
Every remote listed for the GMC Terrain 2018–2019 transmits on 315 MHz.
Which transponder chip does the GMC Terrain 2018–2019 key use?
The listings for this car carry: ID46E (GM extended) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do GMC Terrain 2018–2019 remotes carry?
The remotes listed for this car carry FCC ID 0HT01060512, HYQ1AA, HYQ1AS, HYQ1EA and HYQ1ES. Match it with the FCC ID printed on your original remote.
Which blade profile does the GMC Terrain 2018–2019 key use?
The blades listed for this car: HU100.
Which tools program a GMC Terrain 2018–2019 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the GMC Terrain 2018–2019 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 8 remotes.























