Skip to content

Hummer H2 2004 Key Fob & Car Keys

Keys that fit the 2003–2007 Hummer H2: remote keys, 3 buttons, FCC ID LHJ011, 315 MHz. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2004 Hummer H2.

Last updated: 12 November 2026

Key specifications for the Hummer H2 2003–2007

Key types
remote keys and key shells
Frequency
315 MHz
Buttons
3-button
Part numbers
21997127
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hummer parts catalogue, with the specifications on each listing. Every remote listed for the Hummer H2 2003–2007 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hummer H2 2004 key

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: the ignition key, every remote the customer keeps

  1. Close all doors and put the key in the ignition.
  2. Press and hold the power UNLOCK switch on the driver door panel; keep holding until step 4.
  3. Quickly turn the ignition ON (without starting), OFF, ON, OFF.
  4. Release the UNLOCK switch. The locks must cycle by themselves after you let go; if they do not, remove the key, open the driver door and start again.
  5. Hold LOCK and UNLOCK on the remote until the locks cycle (up to 30 seconds).
  6. Repeat step 5 right away for every other remote, the existing ones included.
  7. Turn the ignition ON to leave programming mode.
  8. Test every remote.
Watch out: The locks must cycle after you release the UNLOCK switch, not before; otherwise the car is not in programming mode. Program the customer's existing remotes in the same session.

When the key changed

Key with a blade (regular or flip)

  • 2003 - 2007This yearChip: None (PassLock)(US / Canada cars)No chip in the key; PassLock sensor sits in the ignition lock.
  • 2008 - 2009Chip: ID46Blade: B111(US / Canada cars)Circle Plus key; separate remote.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hummer H2 2003–2007?

3 listings fit the Hummer H2 2003–2007: remote keys and key shells, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hummer H2 2003–2007 remote use?

Every remote listed for the Hummer H2 2003–2007 transmits on 315 MHz.

Which FCC IDs do Hummer H2 2003–2007 remotes carry?

The remotes listed for this car carry FCC ID LHJ011. Match it with the FCC ID printed on your original remote.

Which tools program a Hummer H2 2003–2007 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Hummer H2 2003–2007 remote be programmed without a tool?

The remote is programmed on the car, without a tool.