Skip to content

Hyundai Azera 2012 Key Fob & Car Keys

Keys that fit the 2012 Hyundai Azera: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID SEKSHG11A0B, SEKSHG11B0B or SY5HMFNA04, ID46 (HITAG 2) or 4D-60 chip, 315 MHz or 433 MHz. 23 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Hyundai Azera.

Last updated: 17 November 2026

Key specifications for the Hyundai Azera 2012

Key types
smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
ID46 (HITAG 2) · 4D-60
Blade profile
HY22 · LXP90
Part numbers
81926-2L000 · 81996-3V040 · 81996-2J700 · 81996-3S020 · 81996-3V000 · 95431-3V030
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Azera 2012 key

Smart key (push to start)

6 tools list this key. 3 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO and Lonsdor K518 list add key only.

Programming steps

Add key - Autel MaxiIM IM608

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
  2. Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
  5. Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
  6. Repeat for every fob, the old ones included; cancel when the last one is done.
  7. Check that each fob locks, unlocks and starts the car; read the key count.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob). If a fob is not accepted, take the board out of the shell and press it to the start button again (both tool guides give this tip).
All keys lost - Autel MaxiIM IM608

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer (no Autel all-keys-lost PIN read found for this car's chip), emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, open and close the driver's door, enter the PIN.
  6. Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. If a fob is not accepted, take the board out of the shell and press it to the start button again (both tool guides give this tip). Lost fobs are erased by the learning.

Key with a blade (regular or flip)

4 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key
    • Remote
    PIN read function
  • Lonsdor KH100
    • Remote

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

When the key changed

Smart key (push to start)

  • 2011Chip: 4D-60(GCC / Europe cars)Key 95440-3V010; later HG keys are 8A
  • 2012 - 2017This yearChip: 8A433 MHz(GCC / Europe cars)Early HG keys (95440-3V010) are 4D-60; read the old key
  • 2012 - 2017This yearChip: ID46FCC: SY5DMFNA433(US / Canada cars)315 MHz fobs to 2014, 433 MHz (SY5DMFNA433) 2015-2017
  • 2018 - 2023Chip: ID47433 MHzFCC: SY5IGFGE04, TQ8-FOB-4F260(GCC / Europe cars)Azera / Grandeur IG, not sold in the US

Key with a blade (regular or flip)

  • 2006 - 2011Chip: ID46
  • 2018 - 2019Chip: ID47433 MHz(GCC / Europe cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Azera 2012?

23 listings fit the Hyundai Azera 2012: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai Azera 2012 remote use?

Listings for the Hyundai Azera 2012 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Hyundai Azera 2012 key use?

The listings for this car carry: ID46 (HITAG 2) · 4D-60. Check the chip in each listing's specifications.

Which FCC IDs do Hyundai Azera 2012 remotes carry?

The remotes listed for this car carry FCC ID SEKSHG11A0B, SEKSHG11B0B and SY5HMFNA04. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai Azera 2012 key use?

The blades listed for this car: HY22 · LXP90.

Which tools program a Hyundai Azera 2012 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.