Hyundai Azera 2014 Key Fob & Car Keys
Keys that fit the 2013–2014 Hyundai Azera: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID SEKSVF123BTX, SEKSHG11A0B or SEKSHG11B0B, 4D-60 (80-bit) or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 23 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Hyundai Azera.
Last updated: 16 November 2026
Key specifications for the Hyundai Azera 2013–2014
- Key types
- smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- 4D-60 (80-bit) · ID46 (HITAG 2)
- Blade profile
- HY22 · LXP90
- Part numbers
- 81926-2L000 · 81996-3V040 · 81996-2J700 · 81996-3S020 · 81996-3V000 · 95431-3V030
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $21.07In Stock
- $0.84In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $4.03In Stock
- Hyundai Azera Equus Centennial 2011-2016 Emergency Key Blade TOY48 Uncut Aftermarket Insert
SKU: B02266
$1.40In Stock - $14.04In Stock
- $2.82In Stock
- $3.05In Stock
- $2.81In Stock
- $49.16Out of Stock
Programming the Hyundai Azera 2014 key
Smart key (push to start)
6 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Launch X-431 IMMO
- Add key
- Add key
PIN read function- Universal key
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO and Lonsdor K518 list add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer
- Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
- Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
- Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
- Repeat for every fob, the old ones included; cancel when the last one is done.
- Check that each fob locks, unlocks and starts the car; read the key count.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer (no Autel all-keys-lost PIN read found for this car's chip), emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, open and close the driver's door, enter the PIN.
- Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
4 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key
- Remote
PIN read function- Lonsdor KH100
- Remote
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.
When the key changed
Smart key (push to start)
- 2011Chip: 4D-60(GCC / Europe cars)Key 95440-3V010; later HG keys are 8A
- 2012 - 2017This yearChip: 8A433 MHz(GCC / Europe cars)Early HG keys (95440-3V010) are 4D-60; read the old key
- 2012 - 2017This yearChip: ID46FCC: SY5DMFNA433(US / Canada cars)315 MHz fobs to 2014, 433 MHz (SY5DMFNA433) 2015-2017
- 2018 - 2023Chip: ID47433 MHzFCC: SY5IGFGE04, TQ8-FOB-4F260(GCC / Europe cars)Azera / Grandeur IG, not sold in the US
Key with a blade (regular or flip)
- 2006 - 2011Chip: ID46
- 2018 - 2019Chip: ID47433 MHz(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Azera 2013–2014?
23 listings fit the Hyundai Azera 2013–2014: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Azera 2013–2014 remote use?
Listings for the Hyundai Azera 2013–2014 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Hyundai Azera 2013–2014 key use?
The listings for this car carry: 4D-60 (80-bit) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Azera 2013–2014 remotes carry?
The remotes listed for this car carry FCC ID SEKSHG11A0B, SEKSHG11B0B, SEKSVF123BTX and SY5HMFNA04. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Azera 2013–2014 key use?
The blades listed for this car: HY22 · LXP90.
Which tools program a Hyundai Azera 2013–2014 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.






















