Hyundai Coupe 2010 Key Fob & Car Keys
Keys that fit the 2010 Hyundai Coupe: smart keys and transponder keys, 4 buttons, FCC ID SY5HMFNA04, SVIHMFCH34 or SVIHMFEU04, ID46 (HITAG 2) or CN3 cloning chip chip, 433 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Hyundai Coupe.
Last updated: 9 November 2026
Key specifications for the Hyundai Coupe 2010
- Key types
- smart keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 4-button
- Transponder chip
- ID46 (HITAG 2) · CN3 cloning chip
- Blade profile
- TOY48
- Part numbers
- 81996-2M020
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. Every remote listed for the Hyundai Coupe 2010 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Hyundai Kia Sonata Genesis Optima Sportage 2008-2017 Smart Key Shell 4-Button - TOY48 Blade
SKU: B02233
$4.21In Stock
Programming the Hyundai Coupe 2010 key
Smart key (push to start)
One tool lists this key.
- Add key
- All keys lost
Programming steps
Add key - Lonsdor K518
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Lonsdor K518
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
One tool lists this key.
- Add key
- All keys lost
Programming steps
Add key - Lonsdor K518
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Lonsdor K518
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
When the key changed
Smart key (push to start)
- 2010 - 2016This yearChip: ID46FCC: SY5RBFNA433Genesis Coupe push-start; 2013-2016 fob SY5RBFNA433 is 433 MHz.
Key with a blade (regular or flip)
- 2002 - 2008Chip: ID46(GCC / Europe cars)Coupe GK (Tiburon in the US); US cars not covered here.
- 2010 - 2016This yearChip: ID46Genesis Coupe (BK) key-start trims.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Coupe 2010?
5 listings fit the Hyundai Coupe 2010: smart keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Coupe 2010 remote use?
Every remote listed for the Hyundai Coupe 2010 transmits on 433 MHz.
Which transponder chip does the Hyundai Coupe 2010 key use?
The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Coupe 2010 remotes carry?
The remotes listed for this car carry FCC ID SVIHMFCH34, SVIHMFEU04, SVIHMFKR04, SY5HMFNA04 and SY5RBFNA433. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Coupe 2010 key use?
The blades listed for this car: TOY48.
Which tools program a Hyundai Coupe 2010 key?
The tool makers' coverage lists name Lonsdor K518 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.




