Skip to content

Hyundai Creta 2016–2017 Key Fob & Car Keys

Keys that fit the 2016–2017 Hyundai Creta: smart keys, flip keys and remote keys, 3 buttons, FCC ID RKE4F17, TQ8RKE4F17 or GS433EUGETP, ID47 (HITAG 3) or 8A (H-chip) chip, 433 MHz or 434 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Hyundai Creta.

Last updated: 6 November 2026

Key specifications for the Hyundai Creta 2016–2017

Key types
smart keys, flip keys, remote keys and emergency blades
Frequency
433 MHz and 434 MHz
Buttons
3-button
Transponder chip
ID47 (HITAG 3) · 8A (H-chip)
Part numbers
81926-2L000 · 95430-A0100 · 95440-A0000PGB
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Creta 2016 key

Smart key (push to start)

4 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • All keys lost(non-US cars)
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    PIN read function
  • Launch X-431 IMMO
    • Add key

All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO lists add key only.

Programming steps

Add key - Autel MaxiIM IM608(GCC / Europe cars)

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
    • Remote

When the key changed

Smart key (push to start)

  • 2016 - 2021This yearChip: 8A433 MHz(GCC / Europe cars)First generation (GS); push-start trims only.
  • 2021 - 2024Chip: 6A433 MHzFCC: NYOSYEC5FOB1907, MBEC4FOB2007(GCC / Europe cars)Second generation (SU2), the 2023 facelift included.

Key with a blade (regular or flip)

  • 2021 - 2024Chip: 8A433 MHzFCC: SYEC3TX2003(GCC / Europe cars)Second generation (SU2) flip key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Creta 2016–2017?

5 listings fit the Hyundai Creta 2016–2017: smart keys, flip keys, remote keys and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai Creta 2016–2017 remote use?

Listings for the Hyundai Creta 2016–2017 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Hyundai Creta 2016–2017 key use?

The listings for this car carry: ID47 (HITAG 3) · 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Hyundai Creta 2016–2017 remotes carry?

The remotes listed for this car carry FCC ID GS433EUGETP, RKE4F17 and TQ8RKE4F17. Match it with the FCC ID printed on your original remote.

Which tools program a Hyundai Creta 2016–2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO and Lonsdor K518 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.