Hyundai Elantra 2016 Key Fob & Car Keys
Keys that fit the 2016 Hyundai Elantra: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID SY5MDFNA433, 0KA186T or 0KA420T, 8A (H-chip) or ID46 (HITAG 2) chip, 433 MHz or 434 MHz. 26 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Hyundai Elantra.
Last updated: 17 November 2026
Key specifications for the Hyundai Elantra 2016
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz and 434 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- 8A (H-chip) · ID46 (HITAG 2) · 4D-60 (80-bit)
- Blade profile
- HYN14R · LXP90
- Part numbers
- 95440-F2000 · 81926-2L000 · 81996-B4520 · 95430-3X300 · 81996-A5020 · 81996-2M020 · 81996-2M026 · 95430-F2110
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $33.71In Stock
- $0.84In Stock
- Hyundai Elantra 2011-2016 Flip Key TPU Cover 3-button Black Chrome - Fits Key 95430-3X101
SKU: B07768
$1.96In Stock - $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.40In Stock
- $16.85In Stock
- $2.81In Stock
- $21.07In Stock
- $4.65In Stock
- $0.56In Stock
- $70.22Out of Stock
- Hyundai Elantra 2016-2019 Flip Remote Key 3-Button 433MHz - 95430-F2110 - Genuine · OEM · New
SKU: B00782
$69.25Out of Stock
Programming the Hyundai Elantra 2016 key
Smart key (push to start)
8 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote(non-US cars)
PIN read function - Add key
- All keys lost
- Launch X-431 IMMO
- Add key
- Add key
PIN read function- Universal key
- Universal key
- Universal key
All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Launch X-431 IMMO and Lonsdor K518 list add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer
- Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
- Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
- Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
- Repeat for every fob, the old ones included; cancel when the last one is done.
- Check that each fob locks, unlocks and starts the car; read the key count.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by OBD on 8A cars (hazards on, ignition off, driver's door opened and closed, then the tool reads; it takes a while); other chips: PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
- Read the PIN by OBD with the 8A smart card function (hazards on, ignition off, open and close the driver's door), or get it by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, open and close the driver's door, enter the PIN.
- Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
7 tools list this key. 4 of them list all keys lost.
- Add key
- All keys lost(non-US cars)
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Add key
- All keys lost
- Lonsdor KH100
- Remote
- Universal key
- Universal key
Programming steps
Add key - Autel MaxiIM IM608
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote cut to the lock, 6-digit PIN: read by OBD on 46-chip SMARTRA cars, read from a working key on 80-bit (4D / DST80) cars where Autel lists it (XP400 + APB131), otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Read the PIN with the tool's PIN function for the chip type; if the car is not listed, get the PIN by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Finish, leave the ignition off for about 10 seconds, then start the engine with each key.
- Learn the remote buttons with Transmitter code saving (ignition off, key out, press LOCK on each remote when prompted).
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Add key - Lonsdor K518(GCC / Europe cars)
Needs: new 46-chip key(s) cut to the lock, every key the customer keeps
- Connect the K518 by OBD.
- Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
- Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
- Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
- Leave the ignition off for about 10 seconds and start with each key.
- Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
All keys lost - Autel MaxiIM IM608
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: read by OBD on 46-chip SMARTRA cars; by VIN from the dealer on 80-bit (4D / DST80) cars, whose PIN read needs a working key, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Get the PIN: tool PIN read by OBD on 46-chip SMARTRA cars, otherwise by VIN from the dealer.
- Start Key learning, switch ON with the first new key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Lonsdor K518(GCC / Europe cars)
Needs: new 46-chip key(s) cut to the lock, at least two new keys
- Connect the K518 by OBD.
- Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
- Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
- Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
- Leave the ignition off for about 10 seconds and start with each key.
- Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
When the key changed
Smart key (push to start)
- 2011 - 2016This yearChip: ID46FCC: SY5HMFNA04, SY5MDFNA433315 MHz fobs to 2013, 433 MHz (SY5MDFNA433) from 2014
- 2017 - 2020Chip: 8A433 MHzFCC: CQOFD00120, FG00140
- from 2021Chip: 6A433 MHzFCC: NYOMBEC5FOB2004, NYOMBEC7FOB2208Sold as HITAG-AES 6A, not 8A or 4A
Key with a blade (regular or flip)
- 2000 - 2010Chip: ID46(GCC / Europe cars)
- 2016 - 2019This yearChip: DST80(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
- from 2021Chip: 8A433 MHzFCC: NYOMBEC4TX2004, MBEC3TX2004US base flip 95430-AA000 has no chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Elantra 2016?
26 listings fit the Hyundai Elantra 2016: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Elantra 2016 remote use?
Listings for the Hyundai Elantra 2016 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Hyundai Elantra 2016 key use?
The listings for this car carry: 8A (H-chip) · ID46 (HITAG 2) · 4D-60 (80-bit). Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Elantra 2016 remotes carry?
The remotes listed for this car carry FCC ID 0KA186T, 0KA420T, CQ0FD00120, SVIMDFGE03 and SY5MDFNA433. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Elantra 2016 key use?
The blades listed for this car: HYN14R · LXP90.
Which tools program a Hyundai Elantra 2016 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II, Launch X-431 IMMO, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

























