Skip to content

Hyundai Genesis 2015–2016 Key Fob & Car Keys

Keys that fit the 2015–2016 Hyundai Genesis: smart keys, 3 or 4 buttons, FCC ID SY5DHFNA433 or SVIDHFGE03, ID47 (HITAG 3) chip, 433 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Hyundai Genesis.

Last updated: 16 November 2026

Key specifications for the Hyundai Genesis 2015–2016

Key types
smart keys, emergency blades and key blanks
Frequency
433 MHz
Buttons
3- and 4-button
Transponder chip
ID47 (HITAG 3)
Blade profile
HYN14R
Part numbers
81996-2M020 · 81996-2M026 · 81996-B1000 · 95440-B1110 · 95440-B1210
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. Every remote listed for the Hyundai Genesis 2015–2016 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Genesis 2015 key

Smart key (push to start)

7 tools list this key. 3 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Lonsdor K518 list add key only.

Programming steps

Add key - Autel MaxiIM IM608

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Autel MaxiIM IM608

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

3 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • Remote
    PIN read function
  • Lonsdor KH100
    • Remote

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

When the key changed

Smart key (push to start)

  • 2009 - 2014Chip: ID46FCC: SY5HMFNA04Sedan (BH): US fobs 315 MHz, GCC fobs 433 MHz
  • 2010 - 2016This yearChip: ID46FCC: SY5HMFNA04, SY5RBFNA433Coupe (BK): 315 MHz fobs to 2013, 433 MHz 95440-2M420 from 2013
  • 2015 - 2016This yearChip: ID47433 MHzFCC: SY5DHFNA433Sedan (DH); sold as Genesis G80 from 2017 (G80 lines)
  • 2017 - 2022Chip: ID47433 MHzFCC: SY5HIFGE04Genesis G90 (HI); EQ900 in Korea from 2016
  • from 2022Chip: ID47433 MHzFCC: TQ8-FOB-4F53UGenesis G90 (RS4); US from the 2023 model year

Key with a blade (regular or flip)

  • 2009 - 2014Chip: ID46Sedan (BH) without push start
  • 2010 - 2013Chip: ID46(US / Canada cars)Coupe (BK) turn-key; some US 2011-2014 coupes have no immobilizer

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Genesis 2015–2016?

5 listings fit the Hyundai Genesis 2015–2016: smart keys, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai Genesis 2015–2016 remote use?

Every remote listed for the Hyundai Genesis 2015–2016 transmits on 433 MHz.

Which transponder chip does the Hyundai Genesis 2015–2016 key use?

The listings for this car carry: ID47 (HITAG 3). Check the chip in each listing's specifications.

Which FCC IDs do Hyundai Genesis 2015–2016 remotes carry?

The remotes listed for this car carry FCC ID SVIDHFGE03 and SY5DHFNA433. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai Genesis 2015–2016 key use?

The blades listed for this car: HYN14R.

Which tools program a Hyundai Genesis 2015–2016 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Lonsdor K518 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.