Skip to content

Hyundai Grand Starex 2016–2020 Key Fob & Car Keys

Keys that fit the 2016–2020 Hyundai Grand Starex: flip keys and remote keys, 2 buttons, FCC ID 0KA420T, 433 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Hyundai Grand Starex.

Last updated: 18 November 2026

Key specifications for the Hyundai Grand Starex 2016–2020

Key types
flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2-button
Blade profile
HYN14 · HYN17 · TOY48
Part numbers
95430-4H400
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. Every remote listed for the Hyundai Grand Starex 2016–2020 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Grand Starex 2016 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key(non-US cars)
    • All keys lost(non-US cars)
  • Advanced Diagnostics Smart Pro
    • All keys lost(non-US cars)

Programming steps

Add key - Lonsdor K518(GCC / Europe cars)

Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done. Up to 8 transponder keys and 4 remotes.
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.
All keys lost - Lonsdor K518(GCC / Europe cars)

Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Cut a new key to the door / ignition lock so the ignition can be switched ON.
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach each new key in turn (switch off, next key, ON within about 10 seconds).
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Lost keys stop starting the car once the new set is taught. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 2016 - 2018This yearChip: ID46433 MHzFCC: OKA-420T(GCC / Europe cars)TQ facelift (H-1 / iMax / iLoad), remote head key 95430-4H400.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Grand Starex 2016–2020?

7 listings fit the Hyundai Grand Starex 2016–2020: flip keys, remote keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai Grand Starex 2016–2020 remote use?

Every remote listed for the Hyundai Grand Starex 2016–2020 transmits on 433 MHz.

Which FCC IDs do Hyundai Grand Starex 2016–2020 remotes carry?

The remotes listed for this car carry FCC ID 0KA420T. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai Grand Starex 2016–2020 key use?

The blades listed for this car: HYN14 · HYN17 · TOY48.

Which tools program a Hyundai Grand Starex 2016–2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.