SKU: B04493
Hyundai Grandeur 2012 Key Fob & Car Keys
Keys that fit the 2012 Hyundai Grandeur: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID SEKSHG11A0B, 4D-60 chip, 433 MHz. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Hyundai Grandeur.
Last updated: 18 November 2026
Key specifications for the Hyundai Grandeur 2012
- Key types
- smart keys, flip keys, remote keys, key shells and emergency blades
- Frequency
- 433 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- 4D-60
- Blade profile
- HY22
- Part numbers
- 95431-3V030 · 95440-3V035
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. Every remote listed for the Hyundai Grandeur 2012 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $49.16Out of Stock
- Hyundai Grandeur HG 2011-2014 Smart Key 4-button 433MHz - 95440-3V035 SEKS-HG11AOB Genuine · OEM
SKU: B06296
$103.36Out of Stock
Programming the Hyundai Grandeur 2012 key
Smart key (push to start)
6 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Launch X-431 IMMO
- Add key
- Add key(US / Canada cars)
- OBDSTAR X300 DP Plus
- Add key(US / Canada cars)
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO, Lonsdor K518 and OBDSTAR X300 DP Plus list add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
Add key - OBDSTAR X300 DP (or Lonsdor K518, same route)(US / Canada cars)
Needs: a working 46-chip smart key, MINI900 / ND900 (CN900 mini) decoder, every fob the customer keeps, new 46-chip smart key
- Take the battery out of the working fob.
- Collect the 12-digit key code with the MINI900 / ND900 held with the fob at the start button (fob-slot cars: remove the slot holder first; repeat if it fails).
- On the tool select the car, Read PinCode, then the 46 smart card PIN function, and enter the 12 digits as the tool asks.
- Note the 6-digit PIN the tool returns.
- Run Smart key programming: ignition OFF, enter the PIN, then press the start button with each fob within 5 seconds (or put it in the slot) until each is accepted.
- Learn every fob to keep, then test lock, unlock and start.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- Add key
- All keys lost
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
Programming steps
Add key - Lonsdor K518
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Lonsdor K518
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
When the key changed
Smart key (push to start)
- 2012 - 2017This yearChip: ID46(US / Canada cars)US Azera fob: 315 MHz to 2014, 433 MHz after
- 2018 - 2022Chip: ID47433 MHz(GCC / Europe cars)
- from 2023Chip: 4A433 MHz(GCC / Europe cars)Seventh generation (GN7)
Key with a blade (regular or flip)
- 2006 - 2011Chip: ID46Sold as Azera in the US
- 2018 - 2019Chip: ID47433 MHz(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Grandeur 2012?
8 listings fit the Hyundai Grandeur 2012: smart keys, flip keys, remote keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Grandeur 2012 remote use?
Every remote listed for the Hyundai Grandeur 2012 transmits on 433 MHz.
Which transponder chip does the Hyundai Grandeur 2012 key use?
The listings for this car carry: 4D-60. Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Grandeur 2012 remotes carry?
The remotes listed for this car carry FCC ID SEKSHG11A0B. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Grandeur 2012 key use?
The blades listed for this car: HY22.
Which tools program a Hyundai Grandeur 2012 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO, Lonsdor K518 and OBDSTAR X300 DP Plus for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.







