Skip to content

Hyundai I10 2008 Key Fob & Car Keys

Keys that fit the 2007–2009 Hyundai I10: smart keys, remote keys and transponder keys, 2 buttons. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Hyundai I10.

Last updated: 15 November 2026

Key specifications for the Hyundai I10 2007–2009

Key types
smart keys, remote keys, transponder keys, key shells and emergency blades
Buttons
2-button
Blade profile
HYN14

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai I10 2008 key

Key with a blade (regular or flip)

4 tools list this key. 4 of them list all keys lost.

    • Add key
    • All keys lost(non-US cars)
    • Remote
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
  • Advanced Diagnostics Smart Pro
    • All keys lost(non-US cars)

Programming steps

Add key - Lonsdor K518 (46-chip PIN read by OBD)(GCC / Europe cars)

Needs: new 46-chip key(s) cut to the lock, every key the customer keeps

  1. Connect the K518 by OBD.
  2. Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
  3. Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
  4. Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
  5. Leave the ignition off for about 10 seconds and start with each key.
  6. Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.
All keys lost - Lonsdor K518 (46-chip PIN read by OBD)(GCC / Europe cars)

Needs: new 46-chip key(s) cut to the lock, at least two new keys

  1. Connect the K518 by OBD.
  2. Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
  3. Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
  4. Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
  5. Leave the ignition off for about 10 seconds and start with each key.
  6. Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Watch out: Lost keys stop starting the car once the new set is taught. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • 2013 - 2018Chip: ID46433 MHzFCC: TQ8-FOB-4F04(GCC / Europe cars)i10 IA / Grand i10 BA keyless trims.
  • from 2020Chip: 4A433 MHzFCC: SVI-BR2FGE03(GCC / Europe cars)Grand i10 AI3 keyless trims; the European i10 AC3 fob is unconfirmed.

Key with a blade (regular or flip)

  • 2008 - 2013This yearChip: ID46(GCC / Europe cars)i10 PA; plain transponder key or flip remote key.
  • 2014 - 2019Chip: ID47433 MHzFCC: OKA-865T, OKA-420T(GCC / Europe cars)i10 IA / Grand i10 BA flip key; 95430-B9000 remotes carry no chip.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai I10 2007–2009?

2 listings fit the Hyundai I10 2007–2009: smart keys, remote keys, transponder keys, key shells and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which blade profile does the Hyundai I10 2007–2009 key use?

The blades listed for this car: HYN14.

Which tools program a Hyundai I10 2007–2009 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.