Skip to content

Hyundai I20 2008 Key Fob & Car Keys

Keys that fit the 2008 Hyundai I20: flip keys and remote keys. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Hyundai I20.

Last updated: 6 November 2026

Key specifications for the Hyundai I20 2008

Key types
flip keys, remote keys, emergency blades and key blanks
Part numbers
81926-2L000 · 81996-2L000

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai I20 2008 key

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key(non-US cars)
    • All keys lost(non-US cars)

Programming steps

Add key - Lonsdor K518 (46-chip PIN read by OBD)(GCC / Europe cars)

Needs: new 46-chip key(s) cut to the lock, every key the customer keeps

  1. Connect the K518 by OBD.
  2. Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
  3. Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
  4. Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
  5. Leave the ignition off for about 10 seconds and start with each key.
  6. Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.
All keys lost - Lonsdor K518 (46-chip PIN read by OBD)(GCC / Europe cars)

Needs: new 46-chip key(s) cut to the lock, at least two new keys

  1. Connect the K518 by OBD.
  2. Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
  3. Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
  4. Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
  5. Leave the ignition off for about 10 seconds and start with each key.
  6. Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Watch out: Lost keys stop starting the car once the new set is taught. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

When the key changed

Smart key (push to start)

  • 2014 - 2018Chip: ID46433 MHz(GCC / Europe cars)Second generation smart key (95440-C8000 / C7100)
  • from 2020Chip: 6A433 MHz(GCC / Europe cars)Third generation (BC3 / BI3); sold as DST-AES 6A

Key with a blade (regular or flip)

  • 2008 - 2014This yearChip: ID46433 MHzFCC: OKA-185T, OKA-865T(GCC / Europe cars)First generation (PB); flip keys 95430-1J000 / 1JAB1
  • 2014 - 2020Chip: ID47433 MHzFCC: RKE-4F22(GCC / Europe cars)Second generation (GB Europe, IB India and GCC)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai I20 2008?

2 listings fit the Hyundai I20 2008: flip keys, remote keys, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which tools program a Hyundai I20 2008 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Lonsdor K518 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.