Skip to content

Hyundai I20 2025–2026 Key Fob & Car Keys

1 compatible key, remote & shell (genuine and aftermarket) available for the 2025 Hyundai I20.

Last updated: 9 November 2026

Key specifications for the Hyundai I20 2025–2026

Transponder chip
8A (H-chip)

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Hyundai I20 2025 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

    • Add key
    • All keys lost(non-US cars)
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    • Remote
    reads the PIN by OBD

All keys lost is listed by Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. OBDSTAR Key Master G3 lists add key only.

Programming steps

Add key - Autel MaxiIM IM608(GCC / Europe cars)

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • 2014 - 2018Chip: ID46433 MHz(GCC / Europe cars)Second generation smart key (95440-C8000 / C7100)
  • from 2020This yearChip: 6A433 MHz(GCC / Europe cars)Third generation (BC3 / BI3); sold as DST-AES 6A

Key with a blade (regular or flip)

  • 2008 - 2014Chip: ID46433 MHzFCC: OKA-185T, OKA-865T(GCC / Europe cars)First generation (PB); flip keys 95430-1J000 / 1JAB1
  • 2014 - 2020Chip: ID47433 MHzFCC: RKE-4F22(GCC / Europe cars)Second generation (GB Europe, IB India and GCC)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which transponder chip does the Hyundai I20 2025–2026 key use?

The listings for this car carry: 8A (H-chip). Check the chip in each listing's specifications.

Which tools program a Hyundai I20 2025–2026 key?

The tool makers' coverage lists name Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.