Skip to content

Hyundai I30 2007 Key Fob & Car Keys

Keys that fit the 2007 Hyundai I30: flip keys and remote keys, 3 buttons, ID46 (HITAG 2) chip, 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 Hyundai I30.

Last updated: 17 November 2026

Key specifications for the Hyundai I30 2007

Key types
flip keys, remote keys, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-button
Transponder chip
ID46 (HITAG 2)
Part numbers
81926-2L000 · 81996-2L000
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. Every remote listed for the Hyundai I30 2007 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai I30 2007 key

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

    • Add key
    • All keys lost
  • OBDSTAR Key Master G3
    • Remote
    no PIN needed

Programming steps

Add key - Lonsdor K518

Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done. Up to 8 transponder keys and 4 remotes.
All keys lost - Lonsdor K518

Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Cut a new key to the door / ignition lock so the ignition can be switched ON.
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach each new key in turn (switch off, next key, ON within about 10 seconds).
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Lost keys stop starting the car once the new set is taught. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

When the key changed

Smart key (push to start)

  • 2012 - 2017Chip: ID46433 MHz(GCC / Europe cars)Second generation (GD)
  • 2013 - 2017Chip: ID46FCC: SY5HMFNA04, SY5MDFNA433(US / Canada cars)Elantra GT (GD): 315 MHz (SY5HMFNA04) 2013-2014, 433 MHz (SY5MDFNA433) 2015-2017
  • 2017 - 2020Chip: 8A433 MHzFCC: NYOSYEC4FOB1608Third generation (PD); US Elantra GT 2018-2020

Key with a blade (regular or flip)

  • 2007 - 2012This yearChip: ID46(GCC / Europe cars)First generation (FD)
  • 2012 - 2017Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
  • 2017 - 2020Chip: DST80433 MHzFCC: OKA-450T(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US Elantra GT flips have no chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai I30 2007?

4 listings fit the Hyundai I30 2007: flip keys, remote keys, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai I30 2007 remote use?

Every remote listed for the Hyundai I30 2007 transmits on 433 MHz.

Which transponder chip does the Hyundai I30 2007 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which tools program a Hyundai I30 2007 key?

The tool makers' coverage lists name Lonsdor K518 and OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.