Skip to content

Hyundai I30 2017 Key Fob & Car Keys

Keys that fit the 2017 Hyundai I30: smart keys, flip keys and remote keys, 3 buttons, FCC ID RKE4F04, 0KA450T or 433EUTP, ID47 (HITAG 3) or 4D-60 (80-bit) chip, 433 MHz or 434 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Hyundai I30.

Last updated: 15 November 2026

Key specifications for the Hyundai I30 2017

Key types
smart keys, flip keys, remote keys, emergency blades and key blanks
Frequency
433 MHz and 434 MHz
Buttons
3-button
Transponder chip
ID47 (HITAG 3) · 4D-60 (80-bit) · 8A (H-chip) · ID46 (HITAG 2)
Blade profile
HU134 · KK12
Part numbers
81926-2L000 · 81996-A5020 · 95430-A5100 · 95430-G3200 · 95440-G3100 · 95440-S0000 · 81996-3R001 · 95440-A5110
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai I30 2017 key

Smart key (push to start)

5 tools list this key. 4 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • All keys lost
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    PIN read function
  • Advanced Diagnostics Smart Pro
    • All keys lost
    • Remote
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • Launch X-431 IMMO
    • Add key

All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX and Advanced Diagnostics Smart Pro. Launch X-431 IMMO lists add key only.

Programming steps

Add key - Autel MaxiIM IM608

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Advanced Diagnostics Smart Pro

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.
All keys lost - Autel MaxiIM IM608

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

6 tools list this key. 4 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
  • Advanced Diagnostics Smart Pro
    • All keys lost
    • Remote
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
    • Universal key
    • Universal key

Programming steps

Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)

Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps

  1. Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
  2. Duplicate the working key; with no immobilizer it starts the engine without programming.
  3. Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
  4. Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
  5. Repeat for each remote to keep (up to 4), then test lock and unlock.
  6. If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Watch out: Only for US cars built without an immobilizer; a car with the immobilizer lamp follows the blade key teaching case. With the dealer anti-theft logic installed, locking with the fob arms the start block and unlocking with a learned fob releases it: the customer needs a learned remote. Remote code saving can drop remotes not pressed in the session: bring them all.
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)

Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps

  1. Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
  2. Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
  3. Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
  4. Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
  5. Repeat for each remote to keep (up to 4), then test lock and unlock.
  6. If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Watch out: Only for US cars built without an immobilizer; a car with the immobilizer lamp follows the blade key teaching case. With the dealer anti-theft logic installed, locking with the fob arms the start block and unlocking with a learned fob releases it: the customer needs a learned remote. Remote code saving can drop remotes not pressed in the session: bring them all.

When the key changed

Smart key (push to start)

  • 2012 - 2017This yearChip: ID46433 MHz(GCC / Europe cars)Second generation (GD)
  • 2013 - 2017This yearChip: ID46FCC: SY5HMFNA04, SY5MDFNA433(US / Canada cars)Elantra GT (GD): 315 MHz (SY5HMFNA04) 2013-2014, 433 MHz (SY5MDFNA433) 2015-2017
  • 2017 - 2020This yearChip: 8A433 MHzFCC: NYOSYEC4FOB1608Third generation (PD); US Elantra GT 2018-2020

Key with a blade (regular or flip)

  • 2007 - 2012Chip: ID46(GCC / Europe cars)First generation (FD)
  • 2012 - 2017This yearChip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
  • 2017 - 2020This yearChip: DST80433 MHzFCC: OKA-450T(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US Elantra GT flips have no chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai I30 2017?

12 listings fit the Hyundai I30 2017: smart keys, flip keys, remote keys, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai I30 2017 remote use?

Listings for the Hyundai I30 2017 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Hyundai I30 2017 key use?

The listings for this car carry: ID47 (HITAG 3) · 4D-60 (80-bit) · 8A (H-chip) · ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Hyundai I30 2017 remotes carry?

The remotes listed for this car carry FCC ID 0KA450T, 433EUTP, NY0SYEC3F0B1608, RKE4F04, SVIMDFGEC0 and SYEC3F0B1608. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai I30 2017 key use?

The blades listed for this car: HU134 · KK12.

Which tools program a Hyundai I30 2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Xhorse VVDI Key Tool Max for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.