Hyundai I30 2019 Key Fob & Car Keys
Keys that fit the 2019 Hyundai I30: smart keys, flip keys and remote keys, 3 buttons, FCC ID 0KA450T, NY0SYEC3F0B1608 or SYEC3F0B1608, ID47 (HITAG 3) or 4D-60 (80-bit) chip, 433 MHz or 434 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2019 Hyundai I30.
Last updated: 17 November 2026
Key specifications for the Hyundai I30 2019
- Key types
- smart keys, flip keys and remote keys
- Frequency
- 433 MHz and 434 MHz
- Buttons
- 3-button
- Transponder chip
- ID47 (HITAG 3) · 4D-60 (80-bit) · 8A (H-chip)
- Blade profile
- HU134 · KK12
- Part numbers
- 95430-G3200 · 95440-G3100 · 95440-S0000
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Hyundai i30 2017-2020 Flip Remote Key 3-Button 433MHz - 95430-G3200 - Genuine · OEM · New
SKU: B00785
$69.94In Stock - Hyundai i30 2017-2020 Smart Key 3-Button 433 MHz 8A Chip - SYEC3FOB1608 95440-G3100 - Aftermarket
SKU: B03981
$19.66In Stock - $16.85In Stock
- Hyundai i30 N 2017-2020 Smart Key 3-Button 433 MHz 8A Chip - SYEC3FOB1608 95440-S0000 - Aftermarket
SKU: B03982
$19.66In Stock - $94.06Out of Stock
Programming the Hyundai I30 2019 key
Smart key (push to start)
5 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Advanced Diagnostics Smart Pro
- All keys lost
- Remote
online calculation · PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial - Launch X-431 IMMO
- Add key
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX and Advanced Diagnostics Smart Pro. Launch X-431 IMMO lists add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
6 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Advanced Diagnostics Smart Pro
- All keys lost
- Remote
online calculation · PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial - Universal key
- Universal key
Programming steps
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
When the key changed
Smart key (push to start)
- 2012 - 2017Chip: ID46433 MHz(GCC / Europe cars)Second generation (GD)
- 2013 - 2017Chip: ID46FCC: SY5HMFNA04, SY5MDFNA433(US / Canada cars)Elantra GT (GD): 315 MHz (SY5HMFNA04) 2013-2014, 433 MHz (SY5MDFNA433) 2015-2017
- 2017 - 2020This yearChip: 8A433 MHzFCC: NYOSYEC4FOB1608Third generation (PD); US Elantra GT 2018-2020
Key with a blade (regular or flip)
- 2007 - 2012Chip: ID46(GCC / Europe cars)First generation (FD)
- 2012 - 2017Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
- 2017 - 2020This yearChip: DST80433 MHzFCC: OKA-450T(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US Elantra GT flips have no chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai I30 2019?
7 listings fit the Hyundai I30 2019: smart keys, flip keys and remote keys, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai I30 2019 remote use?
Listings for the Hyundai I30 2019 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Hyundai I30 2019 key use?
The listings for this car carry: ID47 (HITAG 3) · 4D-60 (80-bit) · 8A (H-chip). Check the chip in each listing's specifications.
Which FCC IDs do Hyundai I30 2019 remotes carry?
The remotes listed for this car carry FCC ID 0KA450T, NY0SYEC3F0B1608 and SYEC3F0B1608. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai I30 2019 key use?
The blades listed for this car: HU134 · KK12.
Which tools program a Hyundai I30 2019 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Xhorse VVDI Key Tool Max for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.






