Hyundai I45 2011 Key Fob & Car Keys
Keys that fit the 2010–2014 Hyundai I45: smart keys, 3 buttons, FCC ID SVIMDFEU03. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Hyundai I45.
Last updated: 11 November 2026
Key specifications for the Hyundai I45 2010–2014
- Key types
- smart keys and key shells
- Buttons
- 3-button
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Hyundai I45 2011 key
Smart key (push to start)
5 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost(non-US cars)
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Launch X-431 IMMO
- Add key
- Add key
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO and Lonsdor K518 list add key only.
Programming steps
Add key - Autel MaxiIM IM608(GCC / Europe cars)
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer
- Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
- Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
- Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
- Repeat for every fob, the old ones included; cancel when the last one is done.
- Check that each fob locks, unlocks and starts the car; read the key count.
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer (no Autel all-keys-lost PIN read found for this car's chip), emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, open and close the driver's door, enter the PIN.
- Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- Add key
- All keys lost(non-US cars)
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function
Programming steps
Add key - Lonsdor K518(GCC / Europe cars)
Needs: new 46-chip key(s) cut to the lock, every key the customer keeps
- Connect the K518 by OBD.
- Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
- Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
- Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
- Leave the ignition off for about 10 seconds and start with each key.
- Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
All keys lost - Lonsdor K518(GCC / Europe cars)
Needs: new 46-chip key(s) cut to the lock, at least two new keys
- Connect the K518 by OBD.
- Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
- Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
- Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
- Leave the ignition off for about 10 seconds and start with each key.
- Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
When the key changed
Smart key (push to start)
- 2010 - 2014This yearChip: ID46433 MHzFCC: SVI-MDFEU03(GCC / Europe cars)Sonata YF sold as i45; push-start trims only.
Key with a blade (regular or flip)
- 2010 - 2014This yearChip: ID46(GCC / Europe cars)Sonata YF sold as i45; flip key 95430-3S461.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai I45 2010–2014?
4 listings fit the Hyundai I45 2010–2014: smart keys and key shells, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which FCC IDs do Hyundai I45 2010–2014 remotes carry?
The remotes listed for this car carry FCC ID SVIMDFEU03. Match it with the FCC ID printed on your original remote.
Which tools program a Hyundai I45 2010–2014 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Launch X-431 IMMO and Lonsdor K518 for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.



