Hyundai Santa FE 2014 Key Fob & Car Keys
Keys that fit the 2014 Hyundai Santa FE: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID RKE4F17, SY5DMFNA04 or TQ8RKE3F04, ID46 (HITAG 2) or 4D-60 (80-bit) chip, 315 MHz or 433 MHz. 29 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Hyundai Santa FE.
Last updated: 17 November 2026
Key specifications for the Hyundai Santa FE 2014
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- ID46 (HITAG 2) · 4D-60 (80-bit)
- Blade profile
- HYN17R · HY18R
- Part numbers
- 95440-4Z200 · 95430-2W100 · 81926-2L000 · 95430-2W400 · 81996-2W040 · 95430-2W410 · 95440-2W600 · 95430-2W101
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $25.83In Stock
- $0.84In Stock
- $1.83In Stock
- Hyundai Santa Fe / Grand Santa Fe 2013-2018 Smart Key Shell 3-button with HYN17R Emergency Blade
SKU: B02237
$3.65In Stock - $4.78In Stock
- $1.40In Stock
- $0.42In Stock
- Hyundai Santa Fe 2014-2018 Flip Remote Key 3-Button 433MHz - 95430-2W410 - Genuine · OEM · Used
SKU: B01542
$21.07In Stock - $21.07In Stock
- Hyundai Sonata / Santa Fe / Tucson / Elantra 2009-2017 Flip Key Rubber Button Pad 4-button
SKU: B02347
$0.56In Stock - $5.17Out of Stock
- Hyundai Santa Fe 2013-2015 Flip Remote Key 4-Button 433MHz - 95430-2W101 - Genuine · OEM · New
SKU: B00724
$38.24Out of Stock - Hyundai Santa Fe 2013-2016 Smart Key 3-button - 433MHz · ID46 · PN 95440-2W600 - Genuine · OEM · New
SKU: B00857
$138.51Out of Stock - $68.82Out of Stock
- $71.63Out of Stock
- $18.26Out of Stock
Programming the Hyundai Santa FE 2014 key
Smart key (push to start)
8 tools list this key. 4 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - Advanced Diagnostics Smart Pro
- All keys lost
- Remote
PIN read functionNeeds: AD ADC2000 cable - Launch X-431 IMMO
- Add key
- Add key
PIN read function- OBDSTAR X300 DP Plus
- Add key
- Universal key
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX and Advanced Diagnostics Smart Pro. Launch X-431 IMMO, Lonsdor K518 and OBDSTAR X300 DP Plus list add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
Add key - OBDSTAR X300 DP (or Lonsdor K518, same route)
Needs: a working 46-chip smart key, MINI900 / ND900 (CN900 mini) decoder, every fob the customer keeps, new 46-chip smart key
- Take the battery out of the working fob.
- Collect the 12-digit key code with the MINI900 / ND900 held with the fob at the start button (fob-slot cars: remove the slot holder first; repeat if it fails).
- On the tool select the car, Read PinCode, then the 46 smart card PIN function, and enter the 12 digits as the tool asks.
- Note the 6-digit PIN the tool returns.
- Run Smart key programming: ignition OFF, enter the PIN, then press the start button with each fob within 5 seconds (or put it in the slot) until each is accepted.
- Learn every fob to keep, then test lock, unlock and start.
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
7 tools list this key. 5 of them list all keys lost.
- Add key
- All keys lost
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- Advanced Diagnostics Smart Pro
- All keys lost
- Remote
PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial - Universal key
- Universal key
Programming steps
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Add key - Lonsdor K518
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Lonsdor K518
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
Without a tool
The remote is not programmed on the car by hand: it needs a tool or a dealer.
When the key changed
Smart key (push to start)
- 2010 - 2012Chip: ID46433 MHz(GCC / Europe cars)Push-to-start trims only
- 2013 - 2018This yearChip: ID46FCC: SY5DMFNA04, SY5DMFNA433US fobs 315 MHz, GCC fobs 433 MHz
- 2019 - 2023Chip: ID47433 MHzFCC: TQ8-FOB-4F19
- from 2024Chip: 4A433 MHzFCC: TQ8-FOB-4F61M43
Key with a blade (regular or flip)
- 2000 - 2002Chip: 4D-60(GCC / Europe cars)
- 2003 - 2012Chip: ID46(GCC / Europe cars)
- 2013 - 2018This yearChip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US flips have no chip
- 2019 - 2023Chip: ID47433 MHzFCC: TQ8-RKE-4F39US flips 95430-S2100 / S2300 have no chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Santa FE 2014?
29 listings fit the Hyundai Santa FE 2014: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Santa FE 2014 remote use?
Listings for the Hyundai Santa FE 2014 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Hyundai Santa FE 2014 key use?
The listings for this car carry: ID46 (HITAG 2) · 4D-60 (80-bit). Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Santa FE 2014 remotes carry?
The remotes listed for this car carry FCC ID DM433EUTP, RKE4F04, RKE4F07, RKE4F08, RKE4F17, SV1DMFEU03, SY5DMFNA04 and TQ8RKE3F04. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Santa FE 2014 key use?
The blades listed for this car: HYN17R · HY18R.
Which tools program a Hyundai Santa FE 2014 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Lonsdor K518 for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Hyundai Santa FE 2014 remote be programmed without a tool?
The remote is not programmed on the car by hand: it needs a tool or a dealer.




























