Skip to content

Hyundai Starex 2015 Key Fob & Car Keys

Keys that fit the 2008–2015 Hyundai Starex: remote keys, 1 button, FCC ID 0KA411T. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2015 Hyundai Starex.

Last updated: 2 October 2026

Key specifications for the Hyundai Starex 2008–2015

Key types
remote keys, key shells and emergency blades
Buttons
1-button
Blade profile
HYN14
Part numbers
81996-4H800
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Starex 2015 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

    • Add key(non-US cars)
    • All keys lost(non-US cars)
  • Advanced Diagnostics Smart Pro
    • All keys lost(non-US cars)
  • OBDSTAR Key Master G3
    • Add key
    • Remote
    reads the PIN by OBD

All keys lost is listed by Lonsdor K518 and Advanced Diagnostics Smart Pro. OBDSTAR Key Master G3 lists add key only.

Programming steps

Add key - Lonsdor K518(GCC / Europe cars)

Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done. Up to 8 transponder keys and 4 remotes.
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.
All keys lost - Lonsdor K518(GCC / Europe cars)

Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Cut a new key to the door / ignition lock so the ignition can be switched ON.
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach each new key in turn (switch off, next key, ON within about 10 seconds).
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Lost keys stop starting the car once the new set is taught. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

When the key changed

Key with a blade (regular or flip)

  • 2015 - 2018This yearChip: ID46433 MHzFCC: OKA-420T(GCC / Europe cars)TQ facelift (H-1 / Grand Starex / iMax / iLoad), remote head key 95430-4H400.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Starex 2008–2015?

1 listing fit the Hyundai Starex 2008–2015: remote keys, key shells and emergency blades, in 1-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Hyundai Starex 2008–2015 remotes carry?

The remotes listed for this car carry FCC ID 0KA411T. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai Starex 2008–2015 key use?

The blades listed for this car: HYN14.

Which tools program a Hyundai Starex 2008–2015 key?

The tool makers' coverage lists name Lonsdor K518, Advanced Diagnostics Smart Pro and OBDSTAR Key Master G3 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.