SKU: B05614
Hyundai Venue 2020 Key Fob & Car Keys
Keys that fit the 2020 Hyundai Venue: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID SY5QXFGE03, SY5IGFGE04 or SVIIGFGE04, 4A (HITAG AES) or NXP PCF7939MA chip, 433 MHz or 434 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Hyundai Venue.
Last updated: 16 November 2026
Key specifications for the Hyundai Venue 2020
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz and 434 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- 4A (HITAG AES) · NXP PCF7939MA
- Blade profile
- KK12
- Part numbers
- 95440-K2200 · 95440-K3100 · 95440-K2100 · 95430-K2500 · 95440-K2400 · XZHY84EN
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Hyundai Elantra Kona Santa Fe 2017-2022 Flip Key Blade KK12 - 81996-G3100 - Aftermarket · New$0.49In Stock
- Hyundai Venue 2020-2025 Smart Key 3-Button 433 MHz 4A Chip - SY5QXFGE03 95440-K2200 - Aftermarket
SKU: B03977
$19.66In Stock - $70.28Out of Stock
- Hyundai Venue 2020-2026 Flip Remote Key 3-Button 433MHz - 95430-K2500 - Genuine · OEM · New
SKU: B00805
$37.93Out of Stock - $61.80Out of Stock
Programming the Hyundai Venue 2020 key
Smart key (push to start)
7 tools list this key. 5 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key(non-US cars)
- All keys lost
- Remote
online calculation · PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial - OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
reads the PIN by OBD - Launch X-431 IMMO
- Add key
- Universal key
All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO lists add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
Add key - Lonsdor K518
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
All keys lost - Lonsdor K518
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
4 tools list this key. 3 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key(non-US cars)
- All keys lost
- Remote
online calculation · PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial - OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key
- Remote
All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.
Programming steps
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
- Test start and lock / unlock with every key.
When the key changed
Smart key (push to start)
- from 2019This yearChip: 4A433 MHzFCC: SY5IGFGE04QX / QXi; US cars from the 2020 model year
Key with a blade (regular or flip)
- from 2020This yearChip: 4A433 MHzFCC: SY51GRGE03Flip key 95430-K2400 for trims without push start
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Hyundai Venue 2020?
11 listings fit the Hyundai Venue 2020: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Hyundai Venue 2020 remote use?
Listings for the Hyundai Venue 2020 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Hyundai Venue 2020 key use?
The listings for this car carry: 4A (HITAG AES) · NXP PCF7939MA. Check the chip in each listing's specifications.
Which FCC IDs do Hyundai Venue 2020 remotes carry?
The remotes listed for this car carry FCC ID SVIIGFGE04, SY5IGFGE04 and SY5QXFGE03. Match it with the FCC ID printed on your original remote.
Which blade profile does the Hyundai Venue 2020 key use?
The blades listed for this car: KK12.
Which tools program a Hyundai Venue 2020 key?
The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.










