Skip to content

Hyundai Venue 2021 Key Fob & Car Keys

Keys that fit the 2021 Hyundai Venue: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID SVIAERGE03, SY5IGFGE04 or SY5QXFGE03, 4A (HITAG AES) or NXP PCF7939MA chip, 433 MHz or 434 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2021 Hyundai Venue.

Last updated: 18 November 2026

Key specifications for the Hyundai Venue 2021

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz and 434 MHz
Buttons
2-, 3- and 4-button
Transponder chip
4A (HITAG AES) · NXP PCF7939MA
Blade profile
KK12
Part numbers
95440-K2200 · 95430-K3001 · 95440-K3100 · 95430-K2500 · 95440-K2400 · XZHY84EN
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Hyundai Venue 2021 key

Smart key (push to start)

7 tools list this key. 5 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key(non-US cars)
    • All keys lost
    • Remote(US / Canada cars)
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • All keys lost
    • Add key
    • All keys lost
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    reads the PIN by OBD
  • Launch X-431 IMMO
    • Add key
    • Universal key

All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Launch X-431 IMMO lists add key only.

Programming steps

Add key - Autel MaxiIM IM608

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
Add key - Lonsdor K518

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Advanced Diagnostics Smart Pro

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.
All keys lost - Autel MaxiIM IM608

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Lonsdor K518

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

4 tools list this key. 3 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key(non-US cars)
    • All keys lost
    • Remote(US / Canada cars)
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key
    • Remote

All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

All keys lost - Advanced Diagnostics Smart Pro

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.

When the key changed

Smart key (push to start)

  • from 2019This yearChip: 4A433 MHzFCC: SY5IGFGE04QX / QXi; US cars from the 2020 model year

Key with a blade (regular or flip)

  • from 2020This yearChip: 4A433 MHzFCC: SY51GRGE03Flip key 95430-K2400 for trims without push start

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Hyundai Venue 2021?

12 listings fit the Hyundai Venue 2021: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Hyundai Venue 2021 remote use?

Listings for the Hyundai Venue 2021 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Hyundai Venue 2021 key use?

The listings for this car carry: 4A (HITAG AES) · NXP PCF7939MA. Check the chip in each listing's specifications.

Which FCC IDs do Hyundai Venue 2021 remotes carry?

The remotes listed for this car carry FCC ID SVIAERGE03, SVIIGFGE04, SY5IGFGE04 and SY5QXFGE03. Match it with the FCC ID printed on your original remote.

Which blade profile does the Hyundai Venue 2021 key use?

The blades listed for this car: KK12.

Which tools program a Hyundai Venue 2021 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.