Hyundai Xcent 2018 Key Fob & Car Keys
1 compatible key, remote & shell (genuine and aftermarket) available for the 2018 Hyundai Xcent.
Last updated: 2 October 2026
Key specifications for the Hyundai Xcent 2014–2020
- Transponder chip
- ID47 (HITAG 3)
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Hyundai parts catalogue, with the specifications on each listing.
Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.
Programming the Hyundai Xcent 2018 key
Smart key (push to start)
5 tools list this key. 2 of them list all keys lost.
- Add key
- All keys lost(non-US cars)
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
PIN read function - OBDSTAR Key Master G3
- Add key
- Remote
reads the PIN by OBD - Launch X-431 IMMO
- Add key
- Universal key
All keys lost is listed by Autel IM608 II / IM608 Pro II and XTOOL X100 PAD3 / X100 MAX. OBDSTAR Key Master G3 and Launch X-431 IMMO list add key only.
Programming steps
Add key - Autel MaxiIM IM608(GCC / Europe cars)
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
2 tools list this key. 1 of them list all keys lost.
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - OBDSTAR Key Master G3
- Add key
- Remote
reads the PIN by OBD
All keys lost is listed by XTOOL X100 PAD3 / X100 MAX. OBDSTAR Key Master G3 lists add key only.
When the key changed
Smart key (push to start)
- 2014 - 2018This yearChip: ID46433 MHz(GCC / Europe cars)Grand i10 sedan (BA) keyless trims; smart keys 95440-B4500 / B9500
Key with a blade (regular or flip)
- 2014 - 2019This yearChip: ID47433 MHz(GCC / Europe cars)Grand i10 sedan (BA) flip key 95430-B4400 / B9000
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which transponder chip does the Hyundai Xcent 2014–2020 key use?
The listings for this car carry: ID47 (HITAG 3). Check the chip in each listing's specifications.
Which tools program a Hyundai Xcent 2014–2020 key?
The tool makers' coverage lists name Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, OBDSTAR Key Master G3, Launch X-431 IMMO and Autel KM100 (IKEY universal smart key) for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
