Skip to content

Infiniti EX35 2008 Key Fob & Car Keys

Keys that fit the 2008 Infiniti EX35: smart keys and flip keys, 3 or 4 buttons, FCC ID KR55WK49622 or KBRASTU15, ID46 (HITAG 2) chip, 315 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Infiniti EX35.

Last updated: 13 November 2026

Key specifications for the Infiniti EX35 2008

Key types
smart keys, flip keys, emergency blades and key blanks
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
ID46 (HITAG 2)
Blade profile
NSN14
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Infiniti parts catalogue, with the specifications on each listing. Every remote listed for the Infiniti EX35 2008 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Infiniti EX35 2008 key

Smart key (push to start)

3 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Without a tool

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote the customer keeps, the car's ignition key

  1. Close all doors and lock them with the power lock switch on the driver's door panel.
  2. Insert the key in the ignition without turning it and pull it fully out, at least 6 times within 10 seconds, about one second each. Keep going (up to 10 or 12 times) until the hazard lights flash.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds, press LOCK on the remote one time only. The hazard lights flash.
  5. For the next remote, press UNLOCK then LOCK on the driver's door switch, and within 5 seconds press LOCK on that remote. The hazard lights flash. Repeat for every remaining remote, working ones included.
  6. When all remotes are done, turn the key to OFF and take it out, unlock with the driver's door switch and open the driver's door.
  7. Test every remote.
Watch out: Any remote left out of this session stops working; have all of them with you. Pull the key fully out each time; going too fast or too slow keeps the car out of programming mode. Press the remote button only once per remote or programming fails.

When the key changed

Smart key (push to start)

  • 2008 - 2012This yearChip: ID46315 MHzFCC: KR55WK49622(US / Canada cars)J50 push-start key 285E3-1BA7A; the 2013 US car is the EX37
  • 2009 - 2013Chip: ID46433 MHzFCC: 5WK49674(GCC / Europe cars)GCC / Europe key 285E3-1BF7A

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Infiniti EX35 2008?

4 listings fit the Infiniti EX35 2008: smart keys, flip keys, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Infiniti EX35 2008 remote use?

Every remote listed for the Infiniti EX35 2008 transmits on 315 MHz.

Which transponder chip does the Infiniti EX35 2008 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Infiniti EX35 2008 remotes carry?

The remotes listed for this car carry FCC ID KBRASTU15 and KR55WK49622. Match it with the FCC ID printed on your original remote.

Which blade profile does the Infiniti EX35 2008 key use?

The blades listed for this car: NSN14.

Which tools program a Infiniti EX35 2008 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.