Skip to content

Infiniti G25 2012 Key Fob & Car Keys

Keys that fit the 2011–2012 Infiniti G25: smart keys, 3 or 4 buttons, FCC ID KR55WK48903, ID46 (HITAG 2) chip, 315 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Infiniti G25.

Last updated: 13 November 2026

Key specifications for the Infiniti G25 2011–2012

Key types
smart keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
3- and 4-button
Transponder chip
ID46 (HITAG 2)
Blade profile
NSN14
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Infiniti parts catalogue, with the specifications on each listing. Every remote listed for the Infiniti G25 2011–2012 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Infiniti G25 2012 key

Smart key (push to start)

5 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Programming steps

Add key - Autel MaxiSys / MaxiIM (Nissan NATS menu)(US / Canada cars)

Needs: every Intelligent Key the customer keeps, PIN read by OBD (BCM code converted to 4-digit PIN)

  1. Turn the hazard lamps on and keep them on for the whole job (stops the BCM sleeping).
  2. Select G25 (2011-2012 sedan) and read the BCM code; the tool converts it to the 4-digit PIN (use the 2009-on conversion).
  3. Insert an Intelligent Key into the in-dash Intelligent Key port and run steering-lock release; the tool warns that keys not presented will be deleted.
  4. Run Intelligent Key registration (C/U initialisation), enter the PIN, and follow the prompts: key in slot, ignition ON, then OFF and remove.
  5. Repeat for each key, old and new, up to 4.
  6. Run the remote (RKE) step if the tool offers it, then brake and press start with the first key to close the session.
  7. Test start, lock and unlock with every key.
Watch out: Steering-lock release / registration deletes every key not registered in the session. Maximum 4 Intelligent Keys. If initialisation is greyed out with the ignition OFF, leave the NATS menu and re-enter with the ignition ON. If no key is accepted (even an OEM key), check the steering lock unit before blaming the key.
All keys lost - Autel MaxiSys / MaxiIM (Nissan NATS menu)(US / Canada cars)

Needs: new Intelligent Key(s), emergency blade cut to the door lock to get in, PIN read by OBD (BCM code converted to 4-digit PIN)

  1. Turn the hazard lamps on and keep them on for the whole job (stops the BCM sleeping).
  2. Select G25 (2011-2012 sedan) and read the BCM code; the tool converts it to the 4-digit PIN (use the 2009-on conversion).
  3. Insert an Intelligent Key into the in-dash Intelligent Key port and run steering-lock release; the tool warns that keys not presented will be deleted.
  4. Run Intelligent Key registration (C/U initialisation), enter the PIN, and follow the prompts: key in slot, ignition ON, then OFF and remove.
  5. Repeat for each key, old and new, up to 4.
  6. Run the remote (RKE) step if the tool offers it, then brake and press start with the first key to close the session.
  7. Test start, lock and unlock with every key.
Watch out: Steering-lock release / registration deletes every key not registered in the session. Maximum 4 Intelligent Keys. If initialisation is greyed out with the ignition OFF, leave the NATS menu and re-enter with the ignition ON. If no key is accepted (even an OEM key), check the steering lock unit before blaming the key.

When the key changed

Smart key (push to start)

  • 2011 - 2012This yearChip: ID46315 MHzFCC: KR55WK48903(US / Canada cars)V36 sedan 2.5 V6; same key as the G37, 285E3-JK65A

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Infiniti G25 2011–2012?

5 listings fit the Infiniti G25 2011–2012: smart keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Infiniti G25 2011–2012 remote use?

Every remote listed for the Infiniti G25 2011–2012 transmits on 315 MHz.

Which transponder chip does the Infiniti G25 2011–2012 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Infiniti G25 2011–2012 remotes carry?

The remotes listed for this car carry FCC ID KR55WK48903. Match it with the FCC ID printed on your original remote.

Which blade profile does the Infiniti G25 2011–2012 key use?

The blades listed for this car: NSN14.

Which tools program a Infiniti G25 2011–2012 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.