Skip to content

Infiniti JX35 2013 Key Fob & Car Keys

Keys that fit the 2013 Infiniti JX35: smart keys, 3, 4 or 5 buttons, FCC ID KR5S180144014, ID47 (HITAG 3) chip, 433 MHz. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Infiniti JX35.

Last updated: 15 November 2026

Key specifications for the Infiniti JX35 2013

Key types
smart keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-, 4- and 5-button
Transponder chip
ID47 (HITAG 3)
Blade profile
NSN14 · NI06
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Infiniti parts catalogue, with the specifications on each listing. Every remote listed for the Infiniti JX35 2013 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Infiniti JX35 2013 key

Smart key (push to start)

4 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Autel IM608 II / IM608 Pro II and Lonsdor K518 list add key only.

Programming steps

Add key - Autel IM608 II / IM508 (guided add key)

Needs: every smart key the customer keeps, PIN handled by the tool (20-digit BCM code, no PIN entry on current software)

  1. Connect by OBD, identify the car and open IMMO > add key (guided); accept that every stored key is erased (max 4).
  2. Ignition OFF, hazard lamps ON, open and close the driver's door once; keep all other keys out of the car.
  3. Press start (ignition ON), check the dash comes on normally, then switch OFF and wait 3 seconds.
  4. Press start once and hold the back (logo end) of the first key against the start button: the dash lights and the security lamp flashes. Switch OFF.
  5. Take that key out of the car and repeat with each key, old and new.
  6. Close: switch OFF, wait 3 seconds, press start and within 5 seconds touch the first programmed key to the button; switch OFF.
  7. Check: open and close the driver's door, lock and unlock with each key, start the engine with each key.
Watch out: Every stored key is erased; maximum 4 keys. These keys lock to the car once programmed: a used OEM key must be unlocked / renewed first. 2013-2015 keys are ID47 and 2016-on keys 4A under the same FCC ID: match the S-number or part number.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2013This yearChip: ID47433 MHzFCC: KR5S180144014JX35 is the 2013 name of the QX60; S180144018 board

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Infiniti JX35 2013?

9 listings fit the Infiniti JX35 2013: smart keys, key shells, emergency blades and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Infiniti JX35 2013 remote use?

Every remote listed for the Infiniti JX35 2013 transmits on 433 MHz.

Which transponder chip does the Infiniti JX35 2013 key use?

The listings for this car carry: ID47 (HITAG 3). Check the chip in each listing's specifications.

Which FCC IDs do Infiniti JX35 2013 remotes carry?

The remotes listed for this car carry FCC ID KR5S180144014. Match it with the FCC ID printed on your original remote.

Which blade profile does the Infiniti JX35 2013 key use?

The blades listed for this car: NSN14 · NI06.

Which tools program a Infiniti JX35 2013 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Infiniti JX35 2013 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.