Skip to content

Infiniti Q60 2015 Key Fob & Car Keys

Keys that fit the 2014–2015 Infiniti Q60: smart keys, 3 or 4 buttons, FCC ID KR55WK48903 or 5WK49671, ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Infiniti Q60.

Last updated: 12 November 2026

Key specifications for the Infiniti Q60 2014–2015

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
ID46 (HITAG 2)
Blade profile
NSN14
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Infiniti parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Infiniti Q60 2015 key

Smart key (push to start)

4 tools list this key. 1 of them list all keys lost.

Programming steps

Add key - Autel MaxiSys / MaxiIM (Nissan NATS menu)(US / Canada cars)

Needs: every Intelligent Key the customer keeps, PIN read by OBD (BCM code converted to 4-digit PIN)

  1. Turn the hazard lamps on and keep them on for the whole job (stops the BCM sleeping).
  2. Select Q60 (2014-2015, the former G37 coupe / convertible) and read the BCM code; the tool converts it to the 4-digit PIN (use the 2009-on conversion).
  3. Insert an Intelligent Key into the in-dash Intelligent Key port and run steering-lock release; the tool warns that keys not presented will be deleted.
  4. Run Intelligent Key registration (C/U initialisation), enter the PIN, and follow the prompts: key in slot, ignition ON, then OFF and remove.
  5. Repeat for each key, old and new, up to 4.
  6. Run the remote (RKE) step if the tool offers it, then brake and press start with the first key to close the session.
  7. Test start, lock and unlock with every key.
Watch out: Steering-lock release / registration deletes every key not registered in the session. Maximum 4 Intelligent Keys. If initialisation is greyed out with the ignition OFF, leave the NATS menu and re-enter with the ignition ON. If no key is accepted (even an OEM key), check the steering lock unit before blaming the key.
All keys lost - Autel MaxiSys / MaxiIM (Nissan NATS menu)(US / Canada cars)

Needs: new Intelligent Key(s), emergency blade cut to the door lock to get in, PIN read by OBD (BCM code converted to 4-digit PIN)

  1. Turn the hazard lamps on and keep them on for the whole job (stops the BCM sleeping).
  2. Select Q60 (2014-2015, the former G37 coupe / convertible) and read the BCM code; the tool converts it to the 4-digit PIN (use the 2009-on conversion).
  3. Insert an Intelligent Key into the in-dash Intelligent Key port and run steering-lock release; the tool warns that keys not presented will be deleted.
  4. Run Intelligent Key registration (C/U initialisation), enter the PIN, and follow the prompts: key in slot, ignition ON, then OFF and remove.
  5. Repeat for each key, old and new, up to 4.
  6. Run the remote (RKE) step if the tool offers it, then brake and press start with the first key to close the session.
  7. Test start, lock and unlock with every key.
Watch out: Steering-lock release / registration deletes every key not registered in the session. Maximum 4 Intelligent Keys. If initialisation is greyed out with the ignition OFF, leave the NATS menu and re-enter with the ignition ON. If no key is accepted (even an OEM key), check the steering lock unit before blaming the key.

When the key changed

Smart key (push to start)

  • 2014 - 2015This yearChip: ID46433 MHzFCC: 5WK49671(GCC / Europe cars)GCC key 285E3-JL38A, same as the G37
  • 2014 - 2015This yearChip: ID46315 MHzFCC: KR55WK48903(US / Canada cars)G37 coupe / convertible renamed; key 285E3-JK65A
  • 2017 - 2022Chip: 4A433 MHzFCC: KR5S180144014, KR5TXN7New Q60 (CV37); KR5TXN7 keys on 2020 and later cars

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Infiniti Q60 2014–2015?

4 listings fit the Infiniti Q60 2014–2015: smart keys, key shells and emergency blades, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Infiniti Q60 2014–2015 remote use?

Listings for the Infiniti Q60 2014–2015 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Infiniti Q60 2014–2015 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Infiniti Q60 2014–2015 remotes carry?

The remotes listed for this car carry FCC ID 5WK49671 and KR55WK48903. Match it with the FCC ID printed on your original remote.

Which blade profile does the Infiniti Q60 2014–2015 key use?

The blades listed for this car: NSN14.

Which tools program a Infiniti Q60 2014–2015 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.