Skip to content

Jaguar X-type 2008 Key Fob & Car Keys

Keys that fit the 2002–2008 Jaguar X-type: flip keys, remote keys and transponder keys, 4 buttons, FCC ID CWTWB1U243 or NHVWB1U241, 4D-60 (40-bit) chip, 315 MHz or 433 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Jaguar X-type.

Last updated: 6 November 2026

Key specifications for the Jaguar X-type 2002–2008

Key types
flip keys, remote keys, transponder keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
4-button
Transponder chip
4D-60 (40-bit)
Blade profile
FO21
Part numbers
For Jaguar C2C35284 / C2S31067
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jaguar parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Jaguar X-type 2008 key

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    reads the PIN by OBD

Programming steps

Add key - on the car

Needs: two working keys (not cloned copies), new 4D60 key cut to the car

  1. Cut the new 4D60 key to the car (Tibbe blade) and keep two different keys that already start the engine at hand.
  2. Insert the first working key, turn it to ON for 1 to 5 seconds, then turn it OFF and remove it.
  3. Within 10 seconds insert the second working key, turn it to ON for 1 to 5 seconds, then OFF and remove it.
  4. Within 10 seconds insert the new key and turn it to ON.
  5. The security light stays on for about 3 seconds and goes out when the key is stored; turn OFF.
  6. Start the engine with the new key. For another key, wait a moment and start again from step 2.
Watch out: Needs two different keys that already start the car; with one key, cloned copies or no key, use a tool or the dealer system. This learns the transponder only; the remote buttons need their own programming. Maximum eight keys on the car.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote to program

  1. Insert the key in the ignition and turn it to position I.
  2. Turn the key to II and back to I quickly, four times. The alarm chimes when the key returns to I the fourth time.
  3. Remove the key from the ignition.
  4. Press any button on each remote. The alarm chimes for each remote that is programmed.
  5. Test every button on all programmed remotes.

When the key changed

Key with a blade (regular or flip)

  • 2002 - 2008This yearChip: 4D-60FCC: NHVWB1U241, CWTWB1U243X400, remote head flip key, PATS in the cluster; Tibbe blade

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Jaguar X-type 2002–2008?

6 listings fit the Jaguar X-type 2002–2008: flip keys, remote keys, transponder keys, key shells and emergency blades, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Jaguar X-type 2002–2008 remote use?

Listings for the Jaguar X-type 2002–2008 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Jaguar X-type 2002–2008 key use?

The listings for this car carry: 4D-60 (40-bit). Check the chip in each listing's specifications.

Which FCC IDs do Jaguar X-type 2002–2008 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1U243 and NHVWB1U241. Match it with the FCC ID printed on your original remote.

Which blade profile does the Jaguar X-type 2002–2008 key use?

The blades listed for this car: FO21.

Which tools program a Jaguar X-type 2002–2008 key?

The tool makers' coverage lists name XTOOL X100 PAD3 / X100 MAX and OBDSTAR Key Master G3 for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Jaguar X-type 2002–2008 remote be programmed without a tool?

The remote is programmed on the car, without a tool.