Skip to content

Jeep Cherokee 2001 Key Fob & Car Keys

Keys that fit the 1999–2001 Jeep Cherokee: transponder keys, 4D-64 chip. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2001 Jeep Cherokee.

Last updated: 9 November 2026

Key specifications for the Jeep Cherokee 1999–2001

Key types
transponder keys, key shells, emergency blades and key blanks
Transponder chip
4D-64
Part numbers
Strattec 5905612

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Jeep Cherokee 2001 key

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working programmed (or original) keys, a new key cut to the car

  1. Put the first working key in the ignition, turn to ON, wait about 3 seconds, then turn OFF and take it out.
  2. Within 15 seconds, put the second working key in, turn to ON and wait about 10 seconds. The immobilizer light comes on and a tone sounds. Turn OFF and take the key out.
  3. Within 50 seconds, put the new key in and turn to ON.
  4. After about 10 seconds a tone sounds and the immobilizer light stays on for 3 seconds: the new key is programmed.
  5. For each extra key, start again from step 1.
Watch out: 2010 and later cars need an automotive locksmith or the dealer; this method does not apply to them. If the ignition recall was carried out on the car, this method is not available. Some 2009 and later Dodge Ram trucks may need dealer programming.
Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. If the car has no Sentry Key light (no immobilizer fitted), a cut key is enough.

When the key changed

Smart key (push to start)

  • 2014 - 2023Chip: Hitag AES (4A)433 MHzFCC: GQ4-54TKL push-to-start; same FCC ID as the Ram ID46 fob, check the chip.

Key with a blade (regular or flip)

  • 1998 - 2001This yearChip: 4D-64Blade: Y160XJ: Sentry Key (SKIM) optional; cars without it start on a cut key.
  • 2002 - 2004Chip: 4D-64Blade: Y160(GCC / Europe cars)KJ, sold as the Liberty in North America; SKIM optional.
  • 2005 - 2007Chip: ID46Blade: Y164(GCC / Europe cars)KJ remote head key (SKREEM).
  • 2008 - 2013Chip: ID46Blade: Y164(GCC / Europe cars)KK remote head key; sold as the Liberty in North America.
  • 2014 - 2023Chip: Hitag AES (4A)433 MHzFCC: GQ4-53TFobik on key-start trims: the fob goes into the dash slot and turns.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Jeep Cherokee 1999–2001?

3 listings fit the Jeep Cherokee 1999–2001: transponder keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Jeep Cherokee 1999–2001 key use?

The listings for this car carry: 4D-64. Check the chip in each listing's specifications.

Which tools program a Jeep Cherokee 1999–2001 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Lonsdor K518 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.