Skip to content

Jeep Compass 2017 Key Fob & Car Keys

Keys that fit the 2017 Jeep Compass: smart keys, remote keys and transponder keys, 2, 3 or 4 buttons, FCC ID M3N40821302 or 0HT692713AA, 4A (HITAG AES) or ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Jeep Compass.

Last updated: 16 November 2026

Key specifications for the Jeep Compass 2017

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3-, 4- and 5-button
Transponder chip
4A (HITAG AES) · ID46 (HITAG 2) · CN3 cloning chip
Blade profile
SIP22
Part numbers
68250343AB · JMD-85JXWAA · For Mopar 04589621AB
Battery
CR2032 · CR2025
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Jeep Compass 2017 key

Smart key (push to start)

5 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
    • Add key
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working programmed keys, a new key cut to the car

  1. Insert the first working key and turn it to ON/RUN for at least 3 and no more than 15 seconds, then turn it to LOCK and remove it.
  2. Within 15 seconds, insert the second working key and turn it to ON/RUN. After 10 seconds a chime sounds and the Vehicle Security Light starts flashing. Turn it to LOCK and remove it.
  3. Within 60 seconds, insert the new key and turn it to ON/RUN. After 10 seconds one chime sounds and the Vehicle Security Light stops flashing.
  4. The security light comes on again for a few seconds and goes off: the new key is programmed, and its remote (RKE) is learned at the same time.
  5. Repeat the whole procedure for each extra key.
Watch out: Needs two working keys; with fewer, the key must be programmed with a tool. Up to eight keys can be programmed.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2017 - 2025This yearChip: Hitag AES (4A)433 MHzBlade: SIP22FCC: M3N-40821302MP push-to-start key; M3N-40821302 also fits ID46 fobs, read the chip.

Key with a blade (regular or flip)

  • 2007 - 2017This yearChip: ID46Blade: Y164FCC: OHT692713AA, OHT692427AAMK remote head key; US remote heads are 315 MHz.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Jeep Compass 2017?

14 listings fit the Jeep Compass 2017: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Jeep Compass 2017 remote use?

Listings for the Jeep Compass 2017 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Jeep Compass 2017 key use?

The listings for this car carry: 4A (HITAG AES) · ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Jeep Compass 2017 remotes carry?

The remotes listed for this car carry FCC ID 0HT692713AA and M3N40821302. Match it with the FCC ID printed on your original remote.

Which blade profile does the Jeep Compass 2017 key use?

The blades listed for this car: SIP22.

Which tools program a Jeep Compass 2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and XTOOL X100 PAD3 / X100 MAX for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Jeep Compass 2017 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.