Skip to content

Jeep Liberty 2004 Key Fob & Car Keys

Keys that fit the 2003–2004 Jeep Liberty: smart keys, remote keys and transponder keys, 3 or 4 buttons, FCC ID GQ43VT17T, 4D-64 chip, 315 MHz or 433 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2004 Jeep Liberty.

Last updated: 9 November 2026

Key specifications for the Jeep Liberty 2003–2004

Key types
smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
3- and 4-button
Transponder chip
4D-64
Part numbers
Strattec 5905612 · 04602261AB
Battery
2× CR2016
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Jeep Liberty 2004 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new blank transponder key cut to the vehicle

  1. Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
  2. Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
  3. Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
  4. Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
  5. After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
  6. For each further key start again from step 2.
Watch out: Needs two different working keys; with one key or none use a tool (it reads the PIN). The new key must be blank: a key already learned to another vehicle is refused. Up to eight keys. If the car has no Sentry Key light (no immobilizer fitted), a cut key is enough. The customer learn works only on US-market vehicles; a GCC or export car needs a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: One working remote available, one working programmed remote, every remote the customer keeps

  1. Re-sync the working remote: press LOCK 5 times, 2 seconds apart.
  2. Turn the ignition to RUN without starting the engine and wait for the chimes to stop.
  3. On a working remote, hold UNLOCK for 4 to 10 seconds.
  4. Within that window, keep holding UNLOCK, press PANIC for 1 second, then release both. A chime within 3 seconds confirms programming mode.
  5. Within 30 seconds of the chime, on the working remote press LOCK and UNLOCK together, release, then press UNLOCK alone. A chime confirms it.
  6. On each new remote, press LOCK and UNLOCK together, release, then press UNLOCK alone. Wait for the chime after each one.
  7. Turn the ignition OFF, pull the key and test every remote.
Watch out: Without one working remote this method does not work: the first remote needs a tool. Start on the remotes within 30 seconds of the chime.

When the key changed

Key with a blade (regular or flip)

  • 2002 - 2004This yearChip: 4D-64Blade: Y160(US / Canada cars)KJ; Sentry Key (SKIM) optional, cars without it start on a cut key.
  • 2005 - 2007Chip: ID46Blade: Y164(US / Canada cars)KJ remote head key (SKREEM).
  • 2008 - 2012Chip: ID46315 MHzBlade: Y164FCC: OHT692713AA(US / Canada cars)KK remote head key; US remote heads are 315 MHz.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Jeep Liberty 2003–2004?

6 listings fit the Jeep Liberty 2003–2004: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Jeep Liberty 2003–2004 remote use?

Listings for the Jeep Liberty 2003–2004 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Jeep Liberty 2003–2004 key use?

The listings for this car carry: 4D-64. Check the chip in each listing's specifications.

Which FCC IDs do Jeep Liberty 2003–2004 remotes carry?

The remotes listed for this car carry FCC ID GQ43VT17T. Match it with the FCC ID printed on your original remote.

Which tools program a Jeep Liberty 2003–2004 key?

The tool makers' coverage lists name Launch X-431 IMMO for this car; 0 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Jeep Liberty 2003–2004 remote be programmed without a tool?

The remote is programmed on the car, without a tool.