Jeep Liberty 2005–2007 Key Fob & Car Keys
Keys that fit the 2005–2007 Jeep Liberty: remote keys and transponder keys, 4 buttons, ID46 (HITAG 2) or CN3 cloning chip chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2005 Jeep Liberty.
Last updated: 15 November 2026
Key specifications for the Jeep Liberty 2005–2007
- Key types
- remote keys, transponder keys and key blanks
- Buttons
- 4-button
- Transponder chip
- ID46 (HITAG 2) · CN3 cloning chip
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $3.37In Stock
- $1.69Out of Stock
Programming the Jeep Liberty 2005 key
Key with a blade (regular or flip)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Add key
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working programmed keys, a new key cut to the car
- Insert the first working key and turn it to ON/RUN for at least 3 and no more than 15 seconds, then turn it to LOCK and remove it.
- Within 15 seconds, insert the second working key and turn it to ON/RUN. After 10 seconds a chime sounds and the Vehicle Security Light starts flashing. Turn it to LOCK and remove it.
- Within 60 seconds, insert the new key and turn it to ON/RUN. After 10 seconds one chime sounds and the Vehicle Security Light stops flashing.
- The security light comes on again for a few seconds and goes off: the new key is programmed, and its remote (RKE) is learned at the same time.
- Repeat the whole procedure for each extra key.
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Remote
Without a tool
The remote is programmed on the car, without a tool. It takes two working keys.
When the key changed
Key with a blade (regular or flip)
- 2002 - 2004Chip: 4D-64Blade: Y160(US / Canada cars)KJ; Sentry Key (SKIM) optional, cars without it start on a cut key.
- 2005 - 2007This yearChip: ID46Blade: Y164(US / Canada cars)KJ remote head key (SKREEM).
- 2008 - 2012Chip: ID46315 MHzBlade: Y164FCC: OHT692713AA(US / Canada cars)KK remote head key; US remote heads are 315 MHz.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Jeep Liberty 2005–2007?
4 listings fit the Jeep Liberty 2005–2007: remote keys, transponder keys and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Jeep Liberty 2005–2007 key use?
The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.
Which tools program a Jeep Liberty 2005–2007 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Jeep Liberty 2005–2007 remote be programmed without a tool?
The remote is programmed on the car, without a tool. It takes two working keys.



