Jeep Wrangler 1999 Key Fob & Car Keys
Keys that fit the 1998–2005 Jeep Wrangler: transponder keys, 4D-64 chip. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 1999 Jeep Wrangler.
Last updated: 9 November 2026
Key specifications for the Jeep Wrangler 1998–2005
- Key types
- transponder keys, key shells, emergency blades and key blanks
- Transponder chip
- 4D-64
- Part numbers
- Strattec 5905612
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.12In Stock
Programming the Jeep Wrangler 1999 key
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working programmed (or original) keys, a new key cut to the car
- Put the first working key in the ignition, turn to ON, wait about 3 seconds, then turn OFF and take it out.
- Within 15 seconds, put the second working key in, turn to ON and wait about 10 seconds. The immobilizer light comes on and a tone sounds. Turn OFF and take the key out.
- Within 50 seconds, put the new key in and turn to ON.
- After about 10 seconds a tone sounds and the immobilizer light stays on for 3 seconds: the new key is programmed.
- For each extra key, start again from step 1.
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Remote
When the key changed
Smart key (push to start)
- from 2018Chip: Hitag AES (4A)433 MHzBlade: SIP22FCC: OHT1130261Flip proximity key; it also turns the ignition on key-start trims.
Key with a blade (regular or flip)
- 1998 - 2006This yearChip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
- 2007 - 2018Chip: ID46Blade: Y164FCC: OHT692713AAJK remote head key; 2018 JK sold beside the new JL.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Jeep Wrangler 1998–2005?
3 listings fit the Jeep Wrangler 1998–2005: transponder keys, key shells, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Jeep Wrangler 1998–2005 key use?
The listings for this car carry: 4D-64. Check the chip in each listing's specifications.
Which tools program a Jeep Wrangler 1998–2005 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.


