SKU: B02395
Jeep Wrangler 2015–2016 Key Fob & Car Keys
Keys that fit the 2015–2016 Jeep Wrangler: remote keys and transponder keys, 2, 3 or 4 buttons, FCC ID 0HT692427AA or 0HT692713AA, ID46 (HITAG 2) or CN3 cloning chip chip, 315 MHz or 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Jeep Wrangler.
Last updated: 17 November 2026
Key specifications for the Jeep Wrangler 2015–2016
- Key types
- remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- ID46 (HITAG 2) · CN3 cloning chip
- Part numbers
- For Mopar 05175817AA · For Mopar 04589621AB
- Battery
- CR2032 · CR2025
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Chrysler / Dodge / Jeep 2004-2016 Remote Head Key Shell 3+1-button Small Type with Y159 Blade$1.40In Stock
- Chrysler / Dodge / Jeep 2004-2017 Remote Head Key Rubber Button Pad 2+1-button with Panic, Small
SKU: B04889
$0.56In Stock - $1.40In Stock
- $3.37In Stock
- $8.43In Stock
- $1.69Out of Stock
Programming the Jeep Wrangler 2015 key
Key with a blade (regular or flip)
4 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Advanced Diagnostics Smart Pro
- Add key
- Add key
PIN read function
All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro and Lonsdor K518 list add key only.
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working programmed keys, a new key cut to the car
- Insert the first working key and turn it to ON/RUN for at least 3 and no more than 15 seconds, then turn it to LOCK and remove it.
- Within 15 seconds, insert the second working key and turn it to ON/RUN. After 10 seconds a chime sounds and the Vehicle Security Light starts flashing. Turn it to LOCK and remove it.
- Within 60 seconds, insert the new key and turn it to ON/RUN. After 10 seconds one chime sounds and the Vehicle Security Light stops flashing.
- The security light comes on again for a few seconds and goes off: the new key is programmed, and its remote (RKE) is learned at the same time.
- Repeat the whole procedure for each extra key.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- Remote
PIN read function
Without a tool
The remote is programmed on the car, without a tool. It takes two working keys. Up to 8 remotes.
When the key changed
Smart key (push to start)
- from 2018Chip: Hitag AES (4A)433 MHzBlade: SIP22FCC: OHT1130261Flip proximity key; it also turns the ignition on key-start trims.
Key with a blade (regular or flip)
- 1998 - 2006Chip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
- 2007 - 2018This yearChip: ID46Blade: Y164FCC: OHT692713AAJK remote head key; 2018 JK sold beside the new JL.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Jeep Wrangler 2015–2016?
10 listings fit the Jeep Wrangler 2015–2016: remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Jeep Wrangler 2015–2016 remote use?
Listings for the Jeep Wrangler 2015–2016 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Jeep Wrangler 2015–2016 key use?
The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.
Which FCC IDs do Jeep Wrangler 2015–2016 remotes carry?
The remotes listed for this car carry FCC ID 0HT692427AA and 0HT692713AA. Match it with the FCC ID printed on your original remote.
Which tools program a Jeep Wrangler 2015–2016 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Jeep Wrangler 2015–2016 remote be programmed without a tool?
The remote is programmed on the car, without a tool. It takes two working keys. Up to 8 remotes.









