Skip to content

Jeep Wrangler 2018 Key Fob & Car Keys

Keys that fit the 2018 Jeep Wrangler: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID 0HT1130261 or 0HT692713AA, ID46 (HITAG 2) or 4A (HITAG AES) chip, 315 MHz or 433 MHz. 23 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Jeep Wrangler.

Last updated: 15 November 2026

Key specifications for the Jeep Wrangler 2018

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
ID46 (HITAG 2) · 4A (HITAG AES) · CN3 cloning chip
Blade profile
SIP22
Part numbers
For Mopar 04589621AB · 68416782AA · 68416786AB · 68416784AA
Battery
CR2025 · CR2450
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Jeep parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Jeep Wrangler 2018 key

Smart key (push to start)

7 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro and Lonsdor K518 list add key only.

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • Advanced Diagnostics Smart Pro
    • Add key

All keys lost is listed by OBDSTAR Key Master G3. Advanced Diagnostics Smart Pro lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Remote head key system, two working programmed keys, a new key cut to the car

  1. Insert the first working key and turn it to ON/RUN for at least 3 and no more than 15 seconds, then turn it to LOCK and remove it.
  2. Within 15 seconds, insert the second working key and turn it to ON/RUN. After 10 seconds a chime sounds and the Vehicle Security Light starts flashing. Turn it to LOCK and remove it.
  3. Within 60 seconds, insert the new key and turn it to ON/RUN. After 10 seconds one chime sounds and the Vehicle Security Light stops flashing.
  4. The security light comes on again for a few seconds and goes off: the new key is programmed, and its remote (RKE) is learned at the same time.
  5. Repeat the whole procedure for each extra key.
Watch out: Needs two working keys; with fewer, the key must be programmed with a tool. Up to eight keys can be programmed.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • from 2018This yearChip: Hitag AES (4A)433 MHzBlade: SIP22FCC: OHT1130261Flip proximity key; it also turns the ignition on key-start trims.

Key with a blade (regular or flip)

  • 1998 - 2006Chip: 4D-64Blade: Y160Sentry Key (SKIM) optional; cars without it start on a cut key.
  • 2007 - 2018This yearChip: ID46Blade: Y164FCC: OHT692713AAJK remote head key; 2018 JK sold beside the new JL.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Jeep Wrangler 2018?

23 listings fit the Jeep Wrangler 2018: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Jeep Wrangler 2018 remote use?

Listings for the Jeep Wrangler 2018 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Jeep Wrangler 2018 key use?

The listings for this car carry: ID46 (HITAG 2) · 4A (HITAG AES) · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Jeep Wrangler 2018 remotes carry?

The remotes listed for this car carry FCC ID 0HT1130261 and 0HT692713AA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Jeep Wrangler 2018 key use?

The blades listed for this car: SIP22.

Which tools program a Jeep Wrangler 2018 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Lonsdor K518, Autel KM100 (IKEY universal smart key) and Xhorse VVDI Key Tool Max for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.