SKU: B01573
Kia Carnival 2020 Key Fob & Car Keys
Keys that fit the 2020 Kia Carnival: smart keys, flip keys and remote keys, 3, 5 or 7 buttons, FCC ID RKE4F18, SY5KA4FGE07 or SY5MQ4FGE05, 4D-60 (80-bit) or 4A (HITAG AES) chip, 433 MHz or 434 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Kia Carnival.
Last updated: 2 October 2026
Key specifications for the Kia Carnival 2020
- Key types
- smart keys, flip keys and remote keys
- Frequency
- 433 MHz and 434 MHz
- Buttons
- 3-, 5- and 7-button
- Transponder chip
- 4D-60 (80-bit) · 4A (HITAG AES) · ID47 (HITAG 3)
- Blade profile
- KK10
- Part numbers
- 95430-A9010 · 95440-R0000 · 95440-R0100 · 95440-A9300
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 433 MHz and 434 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Kia Carnival 2016-2020 Flip Remote Key 3-Button 433MHz - 95430-A9010 - Genuine · OEM · Used$21.07In Stock
- $16.85In Stock
- Kia Carnival 2020–2021 Genuine Smart Key 5-button 434MHz - SY5MQ4FGE05 - 95440-R0000 Original
SKU: B01084
$64.08In Stock - Kia Carnival 2020–2021 Genuine Smart Key 7-button 434MHz - SY5KA4FGE07 - 95440-R0100 Original
SKU: B01085
$60.98In Stock - $75.84Out of Stock
- Kia Sedona Carnival 2015-2021 Smart Key 5+1-Button 433 MHz with Sliding Doors - 95440-A9300
SKU: B00915
$84.27Out of Stock
Programming the Kia Carnival 2020 key
Smart key (push to start)
5 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
reads the PIN by OBD - Advanced Diagnostics Smart Pro
- Add key
- Launch X-431 IMMO
- Add key
All keys lost is listed by OBDSTAR Key Master G3, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro and Launch X-431 IMMO list add key only.
Programming steps
Add key - Lonsdor K518
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Lonsdor K518
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
5 tools list this key. 4 of them list all keys lost.
- Add key
- All keys lost(non-US cars)
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- Advanced Diagnostics Smart Pro
- Add key
online calculation · PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial
All keys lost is listed by Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Advanced Diagnostics Smart Pro lists add key only.
Programming steps
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Add key - Lonsdor K518(GCC / Europe cars)
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Lonsdor K518(GCC / Europe cars)
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
When the key changed
Smart key (push to start)
- 2015 - 2021This yearChip: ID47433 MHzFCC: SY5YPFGE06Sold as Sedona in the US
- from 2021Chip: 4A433 MHzFCC: SY5KA4FGE06US Carnival from the 2022 model year
Key with a blade (regular or flip)
- 2000 - 2002Chip: 4D-60(GCC / Europe cars)
- 2006 - 2014Chip: ID46Some US 2011-2014 Sedonas were built without immobilizer
- 2015 - 2020This yearChip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US flips have no chip
- 2021 - 2023Chip: 4A433 MHzFCC: SVI-SKRGE03(GCC / Europe cars)
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Kia Carnival 2020?
7 listings fit the Kia Carnival 2020: smart keys, flip keys and remote keys, in 3-, 5- and 7-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Kia Carnival 2020 remote use?
Listings for the Kia Carnival 2020 come in 433 MHz and 434 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Kia Carnival 2020 key use?
The listings for this car carry: 4D-60 (80-bit) · 4A (HITAG AES) · ID47 (HITAG 3). Check the chip in each listing's specifications.
Which FCC IDs do Kia Carnival 2020 remotes carry?
The remotes listed for this car carry FCC ID RKE4F18, SY5KA4FGE07, SY5MQ4FGE05, SY5YPFGE0 and SY5YPFGE06. Match it with the FCC ID printed on your original remote.
Which blade profile does the Kia Carnival 2020 key use?
The blades listed for this car: KK10.
Which tools program a Kia Carnival 2020 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and Autel IM608 II / IM608 Pro II for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.






